The CJ3A Page CJ3B.info

Author Topic: Drivers Seat Modification  (Read 2949 times)

0 Members and 1 Guest are viewing this topic.

Offline BMIC

  • Willys Guru
  • ****
  • Posts: 406
  • Karma: +0/-0
  • Weekend Mechanic
    • View Profile
Drivers Seat Modification
« on: March 17, 2016, 02:07:49 PM »
I want to cut into the wheel well a bit so that I can push the drivers seat back a few inches. I know I've seen posts on this before but unable to locate any in the search file. Anybody have a post or pictures dealing with this?
We are masters of the unsaid words, but slaves of those we let slip out... WC

Offline LeeC

  • Willys Fan
  • **
  • Posts: 63
  • Karma: +0/-0
  • Still Plays With Jeeps
    • View Profile
Re: Drivers Seat Modification
« Reply #1 on: March 17, 2016, 06:37:07 PM »
Go on Pirate 4x4 and look in the Willys section, you should be able to find plenty.

Offline BMIC

  • Willys Guru
  • ****
  • Posts: 406
  • Karma: +0/-0
  • Weekend Mechanic
    • View Profile
Re: Drivers Seat Modification
« Reply #2 on: March 18, 2016, 02:34:58 PM »
LeeC .... Thanks but could not find anything on Pirate 4x4, but that could be me.
There is some stuff here but I never seem to have much luck with the search tab. Not a complicated modification I would just rather measure twice before I cut.
We are masters of the unsaid words, but slaves of those we let slip out... WC

Offline Ryan_M

  • Flatfender Master
  • *****
  • Posts: 1704
  • Karma: +0/-0
    • View Profile
Current:
'49 CJ3A
'51 CJ3A
'42 Willys MB-T
'47 Bantam T3-C
Previous:
'46 2A
'51 3A
'52 3A
'52 M38
'54 3B
East Coast Wi

Offline Trenton

  • Flatfender Enthusiast
  • ***
  • Posts: 115
  • Karma: +0/-0
  • Still Plays With Jeeps
    • View Profile
Re: Drivers Seat Modification
« Reply #4 on: March 19, 2016, 03:13:25 AM »
on pirate look up "Rango"
1950 CJ3A... Work in progress

Offline LeeC

  • Willys Fan
  • **
  • Posts: 63
  • Karma: +0/-0
  • Still Plays With Jeeps
    • View Profile
Re: Drivers Seat Modification
« Reply #5 on: March 19, 2016, 04:35:20 PM »
I can never seem to find what I want with the search either.