The CJ3A Page CJ3B.info
« previous next »
Pages: [1] 2   Go Down

Author Topic: Floor mats  (Read 10248 times)

0 Members and 1 Guest are viewing this topic.

Offline Ryan_M

  • Flatfender Master
  • *****
  • Posts: 1704
  • Karma: +0/-0
    • View Profile
Floor mats
« on: January 12, 2013, 09:14:15 PM »
Anyone know if 3A's ever came with floor mats? I decided mine needed something. I know you can buy the nice one piece rubber mat - which looks great - but seems like it would cause problems if water gets between it and the floor.

Today I bought some cheapo $7 mats at Lowe's and cut them to fit. They are easy to pull out but I'm hoping they are snug enough to stay in place while driving around. If not, I'll use a little velcro to keep them attached. If they don't work out at least I can use them as patterns for the next attempt. I used a piece to line the bottom of the tool box too.





« Last Edit: January 12, 2013, 09:15:57 PM by Ryan_M »
Logged
Current:
'49 CJ3A
'51 CJ3A
'42 Willys MB-T
'47 Bantam T3-C
Previous:
'46 2A
'51 3A
'52 3A
'52 M38
'54 3B
East Coast Wi

Offline jamesr

  • Willys Guru
  • ****
  • Posts: 343
  • Karma: +0/-0
  • If it's not broke, it's not used.
    • View Profile
Re: Floor mats
« Reply #1 on: January 12, 2013, 09:30:17 PM »
That really looks sharp.  Where did you get the "Willys" sticker on your heater?  Did I send it to you?  I sent one to someone a year or two ago. You have done a fantastic job on that Willys. Keep posting your touches. Jim
Logged
Home of the 4-wheel drive chicken coup.

Offline Ryan_M

  • Flatfender Master
  • *****
  • Posts: 1704
  • Karma: +0/-0
    • View Profile
Re: Floor mats
« Reply #2 on: January 12, 2013, 09:36:55 PM »
Quote
That really looks sharp. �Where did you get the "Willys" sticker on your heater? �Did I send it to you? �I sent one to someone a year or two ago. ...

I bought it on ebay a few months ago. Was it from you?
« Last Edit: January 12, 2013, 09:37:53 PM by Ryan_M »
Logged
Current:
'49 CJ3A
'51 CJ3A
'42 Willys MB-T
'47 Bantam T3-C
Previous:
'46 2A
'51 3A
'52 3A
'52 M38
'54 3B
East Coast Wi

Offline jamesr

  • Willys Guru
  • ****
  • Posts: 343
  • Karma: +0/-0
  • If it's not broke, it's not used.
    • View Profile
Re: Floor mats
« Reply #3 on: January 13, 2013, 09:05:43 AM »
Quote
Quote
That really looks sharp. �Where did you get the "Willys" sticker on your heater? �Did I send it to you? �I sent one to someone a year or two ago. ...

I bought it on ebay a few months ago. Was it from you?
No, I had 5 made, used one for myself, and sent one to someone for n/c.  Thought it may have been you. They look the same.
Logged
Home of the 4-wheel drive chicken coup.

Offline athawk11

  • SMF Administrator
  • Flatfender Master
  • *****
  • Posts: 2818
  • Karma: +0/-1
  • 1949 CJ3A
    • View Profile
Re: Floor mats
« Reply #4 on: January 13, 2013, 09:58:47 AM »
Hey Ryan,

Great work as always.

Great minds think alike.... ;)



Light duty...easy to cut and shape...rubber backed...they stay in position...inexpensive. [smiley=thumbsup.gif]

After one summer season, my driver side is already pretty worn, but for as cheap as these are, who cares.
Logged
2-1949 CJ3As
1-1946 CJ2A

Offline Ryan_M

  • Flatfender Master
  • *****
  • Posts: 1704
  • Karma: +0/-0
    • View Profile
Re: Floor mats
« Reply #5 on: January 13, 2013, 11:51:57 AM »
Looks good Tim. I do fully expect mine to disintegrate after minimal use but it's a cheap experiment. Does anyone know if there was a factory/dealer option for floor mats back in the day?
Logged
Current:
'49 CJ3A
'51 CJ3A
'42 Willys MB-T
'47 Bantam T3-C
Previous:
'46 2A
'51 3A
'52 3A
'52 M38
'54 3B
East Coast Wi

Offline jamesr

  • Willys Guru
  • ****
  • Posts: 343
  • Karma: +0/-0
  • If it's not broke, it's not used.
    • View Profile
Re: Floor mats
« Reply #6 on: January 13, 2013, 05:13:52 PM »
What is this material you guys have found?
Logged
Home of the 4-wheel drive chicken coup.

Offline Ryan_M

  • Flatfender Master
  • *****
  • Posts: 1704
  • Karma: +0/-0
    • View Profile
Re: Floor mats
« Reply #7 on: January 13, 2013, 05:22:21 PM »
I got mine at Lowe's. "Blue Hawk 36" x 24" Charcoal Rectangular Door Mat" for $6.48ea.

They had some heavier ones but I went with these as I wasn't sure if I'd be happy with my "custom" cut and fit attempt. I'd still like to find mats that are more period correct but I needed SOMETHING to protect the bare floors for now. I think they came out pretty well.

« Last Edit: January 13, 2013, 05:32:36 PM by Ryan_M »
Logged
Current:
'49 CJ3A
'51 CJ3A
'42 Willys MB-T
'47 Bantam T3-C
Previous:
'46 2A
'51 3A
'52 3A
'52 M38
'54 3B
East Coast Wi

Offline calvinhunt

  • Flatfender Master
  • *****
  • Posts: 1000
  • Karma: +0/-0
  • Let's keep these great American icons alive!
    • View Profile
Re: Floor mats
« Reply #8 on: January 13, 2013, 09:54:09 PM »
Pics of both Jeeps with floor mats installed look great.  Now I'm arguing with myself rather that's something I want to do or not.
Really great looking Jeeps.  Let us know if you're pleased with the performance of the floor mats.  
Logged
Calvin
Santa Clara, Utah

Offline Carls_jeep

  • Flatfender Master
  • *****
  • Posts: 1746
  • Karma: +0/-0
  • ...
    • View Profile
Re: Floor mats
« Reply #9 on: January 14, 2013, 10:22:23 AM »
It certainly would keep the floor from getting scratched up on a restored Jeep.
Logged

Offline Gunslinger

  • Flatfender Master
  • *****
  • Posts: 942
  • Karma: +0/-0
  • Cj3a, M38A1,
    • View Profile
Re: Floor mats
« Reply #10 on: January 14, 2013, 03:37:44 PM »
I ride with "Lee" on the 2A, he has a 2A... His is quite a bit quieter than my 3A and both are similarly broken in and set up.  He has a set of medium density rubber floor mats that cover the floor on both sides and the transmission tunnel.  I asked him to remove it for a ride one day and we discovered that with the matt out his jeep was about the same in noise and heat that mine was, with it installed  it was much different.  As a result I put a cow matt in the rear of mine.  Those are from Tractor Supply and are about 3/4 inch thick heavy density rubber.  Up front I don't have anything yet, working on that as it seems like a good way to go.
Logged
Climbs trees, hides in the long grass, hangs out with wet dogs...

Offline Flyingfish

  • Project Jeep (Newbie)
  • *
  • Posts: 13
  • Karma: +0/-0
  • If in doubt, ask
    • View Profile
Re: Floor mats
« Reply #11 on: January 16, 2013, 03:52:19 AM »
Hi

Have a look at the attached ad from Popular Mechanics, dated 1949. I do have photo of
this installed from the era but seem not find it...yet.

I can send a better copy if wanted, it's give or take 10Mb's though.

Until later,

Flyingfish.
Logged
Flyingfish
(Marc Oberholzer)

Offline Ryan_M

  • Flatfender Master
  • *****
  • Posts: 1704
  • Karma: +0/-0
    • View Profile
Re: Floor mats
« Reply #12 on: January 16, 2013, 07:26:40 AM »
Heck with the floor mats. I may call JC Whitney and see if they still have any $179 motors sitting on the shelf.
Logged
Current:
'49 CJ3A
'51 CJ3A
'42 Willys MB-T
'47 Bantam T3-C
Previous:
'46 2A
'51 3A
'52 3A
'52 M38
'54 3B
East Coast Wi

Offline Jesse

  • Willys Guru
  • ****
  • Posts: 298
  • Karma: +0/-0
    • View Profile
Re: Floor mats
« Reply #13 on: January 16, 2013, 06:08:48 PM »
Oooo nice, I did the same thing in the back to keep the stainless from getting scratched up. The rubber backing is nice for putting greasy stuff in the back, just flip the mat over and the carpet part doesn't get saturated.

I put a chunk in the toolbox as well but it just serves to hold water in there. So back to the drawing board on that one  ::)

-Jesse
Logged
Its a jeep thing, but you would understand if you have ever lost your wallet.

Offline garage gnome

  • Flatfender Master
  • *****
  • Posts: 1947
  • Karma: +0/-0
  • Rustologist
    • View Profile
Re: Floor mats
« Reply #14 on: January 16, 2013, 08:41:30 PM »
I made some too for my '53 out of a rubber truck bed mat that I flipped over. I made one for the rear too.

Logged
Nate in Western MA 1953 3A #3268, The Jalopy, '47 2A Wheelin' rig, '49 3A, #37071, unmolested, bone stock named Ted
Pages: [1] 2   Go Up
« previous next »