The CJ3A Page CJ3B.info

Author Topic: Todays upgrade and the Timing Mark  (Read 982 times)

0 Members and 2 Guests are viewing this topic.

Offline Gunslinger

  • Flatfender Master
  • *****
  • Posts: 942
  • Karma: +0/-0
  • Cj3a, M38A1,
    • View Profile
Todays upgrade and the Timing Mark
« on: February 16, 2014, 05:23:39 PM »
I don't use my jeep much in the winter so it sits for a long time between uses.� Last time I drove it was New Year, I usually keep it on a trickle charger but I get tired of tripping over cords on the garage floor, so I added this 1.5 amp on board charger today.



It's bolted to the fender just below my fuse block.� This should clean things up a bit.

Here's a picture of the timing mark device that bolts on the front cover, I measured it to be 1/2 inch above the pulley, its from an M38.� Sorry for the poor picture, its pretty crowded down there.



Its the only thing in focus on this shot.

« Last Edit: February 16, 2014, 05:24:03 PM by Gunslinger »
Climbs trees, hides in the long grass, hangs out with wet dogs...