Internet is too slow tonight,so pics will have to wait until tomorrow. Got the saddle/apron or whatever it is called �off and cleaned and cleaned and cleaned. Pretty much all the gears run as smoothly as one can expect such quality stuff made from ZAMAK (die cast aluminum/zinc/unobtanium alloy) to work after I got all the hardened crud out of everything. Atlas was a cheap lathe, but the overall engineering was pretty good at the price they sold for. Had they used brass or machined steel gears they would all still be working. I doubt they expected to have guys like me still using them 60 plus years after they sold them. (Kinda like a 3a!) �The old lathe should be making chips tomorrow if the motor still functions. It is the original Atlas labeled motor, 1/2 hp. �:o
Nate I was using WD 40 to lube my soft bristled wire brush on my die grinder, trying to not ruin the patina while getting rid of the rust. To give you an idea of how gentle a brush I mean , I hit my hand several times tonight with no effect. In general it looks like a well taken care of , but well used lathe now. I'm not going to do the complete dismantle and restore with all new paint like a lot of guys do, I have jeeps to fix and I need the lathe working! Besides I like the way it looks now. It was embarassing how bad it looked before. Now it looks like I might have a clue and actually be able to use it. �
�Mineral spirits and a parts brush worked well to clean a lot of the gears and parts I could take off, and eventually I gave up on the painted surfaces with WD40 and used it there too. �Brake cleaner was my final wash off or carb cleaner if there wasn't paint to preserve. I found some markings I never knew it had, unfortunately found the bed has been abused a bunch and has a lot of marks where things were dropped on it. Even had a hacksaw like mark in one spot!! It made me wonder what sort of machining they were doing with it. The shop I had bought it from in the 80's was using it to turn generator and starter armatures..(no commutator mica cleaning attachment to be found however.) �Still has the old lantern style toolpost which one of these days is going to have a quick change take its place.
Between the lantern toolpost and the well known and hated flexible bed, it won't be making parts for NASA any time soon. Its just a cheap lathe, after all. It matches my lathe skills perfectly. �;D