The CJ3A Page CJ3B.info
« previous next »
Pages: [1]   Go Down

Author Topic: Transfer case mount  (Read 1677 times)

0 Members and 1 Guest are viewing this topic.

Offline Kirkski

  • Flatfender Master
  • *****
  • Posts: 526
  • Karma: +0/-0
  • Still Plays With Jeeps
    • View Profile
Transfer case mount
« on: September 17, 2014, 08:40:57 AM »
I am trying to get the transfer case mount off of my crossmember before I have the frame sandblasted and painted and was going to attempt to reuse it. I have tried a hammer to get the thing off. Is it just stuck with rust, or is there something else I don't know?

 I am sure this question is rudimentary at best, please bear with me.

 Kirk
Logged
'52 CJ-3A

Offline Tumbleweed

  • Flatfender Master
  • *****
  • Posts: 516
  • Karma: +0/-0
  • 49 CJ3A
    • View Profile
Re: Transfer case mount
« Reply #1 on: September 17, 2014, 09:19:13 AM »
The round mount on the right is welded to the cross member. You can take out the rubber mount and also the metal spun insert. When you buy a new mount it will come with the bolt, rubber mount's, spun insert, and nut.

Hope this helps.
Logged
49 CJ3A - "Smokey"
53 Willys Wagon - "Wylie"

Offline athawk11

  • SMF Administrator
  • Flatfender Master
  • *****
  • Posts: 2818
  • Karma: +0/-1
  • 1949 CJ3A
    • View Profile
Re: Transfer case mount
« Reply #2 on: September 17, 2014, 01:24:25 PM »
Quote
The round mount on the right is welded to the cross member. You can take out the rubber mount and also the metal spun insert. When you buy a new mount it will come with the bolt, rubber mount's, spun insert, and nut.

Hope this helps.

X2 !� �[smiley=thumbsup.gif]
Logged
2-1949 CJ3As
1-1946 CJ2A
Pages: [1]   Go Up
« previous next »