Wheel House Picture?

[1955CJ-5]

Does someone happen to have a fairly close up picture of the area where the wheel house, front riser and bed floor all come together? I need to repair the wheel house on both sides but I don't know how they attach to the either the riser or the tool box.

Either side would be fine....both would be fantastic...

Thanks!

Randy

[Comanche_County]

Hope this answers your question...

I post this so long as no one makes fun of my rusty tub... �:'(...sorry,,,I'm working on it...slowly.

The tub is currently laying on its side, hope the orientation isn't confusing. �

Top side.


Underside.

[F Bill]

Jay those are really good and clear pics to explain that area... the only thing I would add is the floor riser is a C shape, not an I shape. and once the floor and riser are all assembled as shown, then, the tool box goes in on top.


How'd you get those text boxes in yellow like that?

[1955CJ-5]

Thanks for those pictures! They are exactly what I needed, and the underside picture shows the location of the captured nuts which were long gone......I see you are ready with the grinder!

Randy

[BMIC]

Nice visual explaination CC...  What rust, I did not see any.

[Comanche_County]

No prob Randy, and Bill is right, its a C shape, not an "I".

I put the imported the pics into Power Point, then saved the presentation as Jpgs.  its just a little technique I picked up when I spent too many of my Infantry years in Division and Corps staff where I was hardly fed or watered, kinda like a salt mine but you sit behind a computer.