I removed the rest of the "mods" from the trailer tonight and was somewhat pleased to find the original coupler buried beneath it all. It's a bummer that it has been bent, drilled, and is pretty much ruined but the bright side is the damage is limited to the coupler itself. Once I find a replacement coupler I should be able to install it without too much trouble.
The original safety chains appear to still be intact too, minus the hooks. Each one was extended to accommodate that gaudy replacement coupler but I removed all the extras. I'll need to find a new set of hooks along with a set of tailgate chains.
The jack was installed so tightly that it bent the frame lip in a couple places but I should be able to bend it back into place.
I removed the Ford hub caps, leaving the bare Ford rims. They are surprisingly close in appearance to the 2A/3A style rims but they too will be replaced.


