The CJ3A Page CJ3B.info

Author Topic: Not 3A but Kinfolk  (Read 2537 times)

0 Members and 1 Guest are viewing this topic.

Offline johnnybravo

  • Willys Fan
  • **
  • Posts: 96
  • Karma: +0/-0
  • Still Plays With Jeeps
    • View Profile
Not 3A but Kinfolk
« on: January 16, 2012, 09:00:53 PM »
I been working on this 3B in my spare time, while the 3A is in the paint shop.  I have had it for about two years.  I brought it home and the Carb. was full of squirrel food and all the throttle linkage was missing.  I changed out the Carb. and installed a battery, throttle linkage, a remote fuel can and it started with at once.  So, I have been using as a tow vehicle.
USAR Vet, Retired. MB, GPW, CJ2A, CJ3A, CJ3B, '47 WO 4x4 Trk, '47 WO 4X2 Wagon

Offline johnnybravo

  • Willys Fan
  • **
  • Posts: 96
  • Karma: +0/-0
  • Still Plays With Jeeps
    • View Profile
Re: Not 3A but Kinfolk
« Reply #1 on: January 16, 2012, 09:02:49 PM »
A very good friend gave me a windshield frame and it feels at home with the rest of the family:
USAR Vet, Retired. MB, GPW, CJ2A, CJ3A, CJ3B, '47 WO 4x4 Trk, '47 WO 4X2 Wagon

Offline johnnybravo

  • Willys Fan
  • **
  • Posts: 96
  • Karma: +0/-0
  • Still Plays With Jeeps
    • View Profile
Re: Not 3A but Kinfolk
« Reply #2 on: January 16, 2012, 09:05:34 PM »
I traded for an OE oil bath and connecting hose to the Carb. air horn:

USAR Vet, Retired. MB, GPW, CJ2A, CJ3A, CJ3B, '47 WO 4x4 Trk, '47 WO 4X2 Wagon

Offline johnnybravo

  • Willys Fan
  • **
  • Posts: 96
  • Karma: +0/-0
  • Still Plays With Jeeps
    • View Profile
Re: Not 3A but Kinfolk
« Reply #3 on: January 16, 2012, 09:16:45 PM »
I have been using without brakes in 4wd-Low, so I decided while I am waiting on the 3A to do a brake job on the 3B before major damage is done.  I ordered all the stuff from Walcks and it arrived last Friday afternoon.  I had some Jeep fun Saturday and this evening after work.  The rear springs are trashed, the PO had a boom rigged on the back and he must have lifted way to much.  It has wood blocks to keep the axle from touching the frame.  Hopefully it will have brakes in about a week, if I don't get sidetracked.
[/img]
USAR Vet, Retired. MB, GPW, CJ2A, CJ3A, CJ3B, '47 WO 4x4 Trk, '47 WO 4X2 Wagon

Offline Gunslinger

  • Flatfender Master
  • *****
  • Posts: 942
  • Karma: +0/-0
  • Cj3a, M38A1,
    • View Profile
Re: Not 3A but Kinfolk
« Reply #4 on: January 17, 2012, 07:55:30 PM »
Johnny, thats nice, is that winch PTO driven?  How far are you going to take it?  I've got a soft spot for the original look, I couldn't do that with XXX cause the body was boogered up.  That one looks like you could get away with minimal body and paint work.  

I'm in the market for a nice original 3B. If you run into one keep me in mind.  
Climbs trees, hides in the long grass, hangs out with wet dogs...

Offline johnnybravo

  • Willys Fan
  • **
  • Posts: 96
  • Karma: +0/-0
  • Still Plays With Jeeps
    • View Profile
Re: Not 3A but Kinfolk
« Reply #5 on: January 17, 2012, 09:04:14 PM »
The tub has some bad places, especially around the spare tire carrier and front fenders are bad. �I have yet to check out the fuel tank and I noticed the passenger side, rear frame rail tip needs some repair. �Maybe this one would be for sale. �Where are you? �I can email you more photos. �I don't want to crate any pressure, as I need to think it over too. �I do have a title, 1961, serial number 57348-69073.
« Last Edit: January 17, 2012, 09:05:08 PM by johnnybravo »
USAR Vet, Retired. MB, GPW, CJ2A, CJ3A, CJ3B, '47 WO 4x4 Trk, '47 WO 4X2 Wagon