Messages

1

"Original"-- Technical Questions, Answers, Observations / Re: Transmission crossmember and pedal dimensions

« on: May 15, 2013, 07:36:27 PM »

Tim thank you for the help, that was just what I needed.

2

"Original"-- Technical Questions, Answers, Observations / Transmission crossmember and pedal dimensions

« on: May 15, 2013, 06:23:48 PM »

I have  searched this page and the 2a site and I could not find what I was looking for. Tryin to find to location of both, so that I can check that my crossmember is in the right place and to figure out where the pedals go. Looking for the dimensions as pulled off the rearmost crossmember. Thanks in advance for all the help.

3

"Original"-- Technical Questions, Answers, Observations / Re: Full front floor with Trans hump

« on: May 05, 2013, 07:31:44 PM »

Went out and cut out what the PO used as a cover.



This is what is left


This is what I pulled out, look to be a premade piece.

4

"Original"-- Technical Questions, Answers, Observations / Re: Full front floor with Trans hump

« on: May 05, 2013, 05:45:27 PM »

I�d look into separate pieces that you can� fit into place and weld

I'm really looking in to it for the Trans hump, I have not seen just it for sale. Most of the front half has been replaced and cut up badly.
This is what I'm working with

5

"Original"-- Technical Questions, Answers, Observations / Full front floor with Trans hump

« on: May 04, 2013, 09:43:58 PM »

Have anyone here seen this or have used it? I'm guessing MDJuan maks it. I have seen it for sale on a few sites. Thinking of using it as my floor is about 60% gone and my hump has been hacked up bad

6

"Original"-- Technical Questions, Answers, Observations / Re: Today's PSA

« on: April 08, 2013, 08:46:39 PM »

Just last June I got a piece of metal in my eye, it was not fun. Waited two days before I went in and got it removed. Had to use eye drops for the next three weeks and had about 6 more visits. Still got a rust spot in it.

7

"Original"-- Technical Questions, Answers, Observations / Re: Help to ID

« on: March 26, 2013, 08:04:00 PM »

Thank you sir

8

"Original"-- Technical Questions, Answers, Observations / Help to ID

« on: March 26, 2013, 07:48:28 PM »

Found this on Craigslist looks like a cj3a from the front bumper but the plate on the cross member is making think it might be military? �

http://detroit.craigslist.org/wyn/pts/3701940174.html

9

"Modifications"-- Technical Questions, Answers, Incites / Re: custom front fenders

« on: July 17, 2013, 06:03:56 AM »

nice work

Nice!

Thanks guys

10

"Modifications"-- Technical Questions, Answers, Incites / Re: custom front fenders

« on: March 26, 2013, 10:55:54 PM »

A few pics next to the originals

11

"Modifications"-- Technical Questions, Answers, Incites / Re: custom front fenders

« on: February 07, 2013, 02:21:13 PM »

thats the shop at school. it nice being able to use it.

You can sometimes get around some of the firewall problems using a little body lift

with the motor being longer it pushed the trans back to, and i wanted to get it back close to stock.

12

"Modifications"-- Technical Questions, Answers, Incites / custom front fenders

« on: February 07, 2013, 01:38:43 PM »

with the ford 289 one of the po put in my jeep there is a loss of space in the front and on the fire wall, the manafolds are touching. so i made some new fenders that are 6" longer and add 2" on each side. i used 1/8 so that i could get away with out the mid brace.


cardbord templet i made


cutting out on the plama table


bending up


tacked up to weld






here you can see the spacers i made to gain the 2"

13

Rambling, Malarky, Rants, Etc... / Re: Nearby Manitowoc WI, Ludington, Bad Axe MI. ???

« on: May 31, 2013, 12:03:32 PM »

If you have time I would recommend going down to the henry ford museum, I know I could spend all day down there.   Saw this last time I was there 

14

Once You've Joined / Re: New from Michigan

« on: October 24, 2013, 06:35:05 PM »

Welcome fellow Michigander. I live just south of Ann Arbor.

15

Once You've Joined / Re: Hello from Chelsea, MI

« on: May 12, 2013, 09:57:45 AM »

Nice to see someone from MI. I'm down in Willis. I would love to see it in person some time. You ever go to the dream cruse?