My Willys 3A and 3B Community
How To Join => Once You've Joined => Topic started by: Quinton on July 24, 2015, 09:16:54 PM
-
I live in Los Angeles, California.� I work for a large appliance manufacturer performing in home appliance service. I just acquired a 1963 Jeep Dispatcher (to be verified via a forum post) in need of some TLC. Can't wait to share my restoration project with everyone!
Thank you all for your expertise in advance!!
-
Welcome to the 3A Page. The Dispatcher is a cool little Willys. Post some photos when you get a chance.
Tim
-
This is before... tomorrow sometime I'll take a few pics of my current status... I cleaned the carb and installed new points, condenser, coil, resistor, plugs, derusted the starter, cleaned the oil pan and replaced the gasket, replaced the toilet paper filter with a cartridge filter, did some temp wiring for the battery and new key start. Currently I dropped the tranny yesterday and cleaned the sludge and gears... cleaned off the surface rust. It's only been 2 weeks lol and I feel I made some serious progress!! The engine fires up!
It's missing a bunch of stuff! I wanted to join here and show the progress and I'm going to need some help figuring out what's missing and where certain hoses go...
:D
-
Ok guys I found the serial number stamped on the frame. Can anyone help me identify ::) the actual year?? The license plate says 63...
DJ-3A
Serial number stamped on the frame is 23577
Engine serial is 3j17518??
See pics attached :-)
-
Welcome aboard!
-
You might want to wander over to the CJ-3B forum.
They have a DJ specific section.
They might be able to give you some good serial number info.
http://z4.invisionfree.com/CJ3B_Bulletin_Board/index.php?
-
Welcome, nice to have a running Jeep, I can only dream� not for long!! :D