My Willys 3A and 3B Community

How To Join => Once You've Joined => Topic started by: Devin on May 27, 2015, 01:07:13 PM

Title: new member from connecticut
Post by: Devin on May 27, 2015, 01:07:13 PM

Hello, not sure how to start off so I'll just start with my willys. It's a 52 willys frame. Modded by someone to run a buick v6. Wasn't hacked but there's a couple things I'd like to fix up. Cj3 body well...what's left of one. Not at all worth saving so I went and bought a md juan tub. And as I expected I'm struggling with that. Holes punched 1/2 off...you know the normal md juan woes. I'm from a small quiet CT town. I have mechanical backround, went to school for aircraft mechanics but never pushed for my lisense. I work at a wire and cable (electrical) factory. I drive a 2000 TJ Wrangler...I have plenty of technical questions. And hope to share some of my limited knowledge with you all.

Title: Re: new member from connecticut
Post by: athawk11 on May 27, 2015, 03:32:28 PM

Welcome Devin.

We have a basic rule here...  Photos.  Must post photos. 

Glad to have you here.

Tim

Title: Re: new member from connecticut
Post by: Quebec Jeep on May 27, 2015, 06:32:52 PM

Welcome aboard!

Title: Re: new member from connecticut
Post by: squidtone on May 27, 2015, 09:01:20 PM

Welcome Devin.
Sounds like a really cool start to a project. Are you staying with a V6?
Throw some pix up of your rig!

I'm from Granby CT, if you're ever in the area let me know.

Title: Re: new member from connecticut
Post by: BMIC on May 28, 2015, 06:19:37 AM

Welcome Devin

Title: Re: new member from connecticut
Post by: Matto on May 31, 2015, 01:11:50 PM

Hi Devin,
              I'm in East Haddam, whereabouts are you?
Pictures please
Matt

Title: Re: new member from connecticut
Post by: Kirkski on May 31, 2015, 01:35:04 PM

Welcome!!