My Willys 3A and 3B Community

How To Join => Once You've Joined => Topic started by: BJ on October 30, 2014, 03:13:02 PM

Title: Well rounded Jeeper
Post by: BJ on October 30, 2014, 03:13:02 PM
I live in East TN.

I have a 1952 CJ that I have been playing with for a while now. I also build Trail Jeeps that are for bouncing off of rocks in the woods. (My Willys is NOT used for this.)

I have built lots of Jeeps over the years but this Willys has been something that I have loved from day one.

Title: Re: Well rounded Jeeper
Post by: BJ on October 30, 2014, 03:18:26 PM
(http://i3.photobucket.com/albums/y77/DirtyRat/Jeep/jeepmud.jpg) (http://s3.photobucket.com/user/DirtyRat/media/Jeep/jeepmud.jpg.html)
Title: Re: Well rounded Jeeper
Post by: athawk11 on October 30, 2014, 03:38:41 PM
Gotta Love It.  Great looking 3A.  What does CMA56  represent?

Tim
Title: Re: Well rounded Jeeper
Post by: Quebec Jeep on October 30, 2014, 05:46:12 PM
Welcome!

Great looking jeep.

You can also post pics of your other built. We love 3A but like other model as well.
Title: Re: Well rounded Jeeper
Post by: BJ on October 31, 2014, 05:10:01 AM
When I first met this jeep it was a high school project. It belonged to the shop instructor to let the students do the work including myself. He graduated from the Columbia Military Academy in 1956. CMA56 

He died a few years after we graduated from high school. When he passed we helped his wife get through some things and get situated. 10 years after that she called me up and asked if I wanted the jeep she could not keep it in a longer. I still lived in the same area and she wanted the students to be able to enjoy it again.


Title: Re: Well rounded Jeeper
Post by: BJ on October 31, 2014, 05:13:51 AM
(http://i3.photobucket.com/albums/y77/DirtyRat/Barons%201980%20CJ/CJ_Set_Free.jpg) (http://s3.photobucket.com/user/DirtyRat/media/Barons%201980%20CJ/CJ_Set_Free.jpg.html)

1980 CJ5

4.88 gears
Detroit lockers in both ends.
Yukon Joints
Twin stick conversion
35" tires
4" lift springs
Throttlebody conversion on the 6cyl.
Hand throttle on the shifter.
Stock 3 speed tranny.
Title: Re: Well rounded Jeeper
Post by: BJ on October 31, 2014, 05:27:39 AM
(http://i3.photobucket.com/albums/y77/DirtyRat/TJ%202003/9FD26D0B-C6D0-45BC-8E0F-43C57E75D6FE_zpsnznlu6xo.jpg) (http://s3.photobucket.com/user/DirtyRat/media/TJ%202003/9FD26D0B-C6D0-45BC-8E0F-43C57E75D6FE_zpsnznlu6xo.jpg.html)


2003 TJ Rubicon

Long arm kit
Tummy tuch skid plate
Motor mount lift
Novak Cable shift conversion.
Ford Explorer Fan and fan clutch.
Tranny cooler
4" lift springs
Rock sliders
Tube fenders.
3/16 plate corners with tube flares.
DOM roll cage
Racing seats with 5 point belts.
Title: Re: Well rounded Jeeper
Post by: BJ on October 31, 2014, 05:39:02 AM
(http://i3.photobucket.com/albums/y77/DirtyRat/Jeep%20ZJ/64935E60-7B72-44BA-9C6E-F4E80019E28B-3027-000004346D03B3CB_zpsd69d92e9.jpg) (http://s3.photobucket.com/user/DirtyRat/media/Jeep%20ZJ/64935E60-7B72-44BA-9C6E-F4E80019E28B-3027-000004346D03B3CB_zpsd69d92e9.jpg.html)

This is my primary trail beeter.

1995 Grand Cherokee
6.5" coils
Rough Country long arm suspension
8.8 rear axle with 4.88 gears and Detroit locker.
Front is the Dana 30 with 4.88 gears and ARB locker.
Two speed tarus electric fan.
16" fan in the hood.
Two pusher cane in the grill.
12k winch.
Full interior roll cage
5 point belts
Removable doors.
On board air. Via Air 450 and tank. 
Tom Woods SYE kit on the 242 transfer case
Tom Woods rear drive shaft.
33" Super Swamper TSLs
2" wheel spacers.
ABS removed

Lots I custom "bodywork"
Title: Re: Well rounded Jeeper
Post by: BJ on October 31, 2014, 05:50:49 AM
I am planning on taking the body off of my Willys this winter and going threw it completely.

I have a list of things I want to look at.

All three peddles and the starter peddle are very loose and floppy.
Brakes leak and could grab better.
Frame needs some paint. (Not rusted threw)
Tranny needs new detent paws. It keeps getting hung in gear or neutral. I'll just do a complete rebuild.
Transfer case is leaking. Same rebuild here.
Want to inspect the axles.
The body has some rust I want to look at. It's an original body. I'm still trying to figure out what I plan to do here. Repair or replace. I would love some input on all of this.

I'll start a build thread when I start taking things apart.
 
Title: Re: Well rounded Jeeper
Post by: BMIC on October 31, 2014, 03:56:27 PM
Welcome BJ and CMA56.... Great story!
Title: Re: Well rounded Jeeper
Post by: BJ on October 31, 2014, 07:21:20 PM
Quote
Welcome BJ and CMA56.... Great story!
Thanks. And because of the way I got the CJ. I will never sell it and I will never chop it up and build a buggy out of it.
Title: Re: Well rounded Jeeper
Post by: Kirkski on November 01, 2014, 07:59:14 PM
Welcome, good stuff !