My Willys 3A and 3B Community

TECH FAQ SECTIONS => BODY and trim => Topic started by: JKWillys on February 17, 2025, 09:35:19 PM

Title: Steering Column Bracket
Post by: JKWillys on February 17, 2025, 09:35:19 PM

Would anybody be able to get a measurement of the steering column bracket arm length in red in the photo? Also, the center to center measurement between the two bolt holes that goes on the dash?

Title: Re: Steering Column Bracket
Post by: Rus Curtis on February 18, 2025, 11:46:07 AM

JK,
I've got everything bolted up so as close as I can measure, the holes are 7 1/4" and the arm is about 2 1/4" (don't really know about the radius though).

Title: Re: Steering Column Bracket
Post by: JKWillys on February 20, 2025, 10:28:56 AM

Thank you, that helps!