My Willys 3A and 3B Community

TECH FAQ SECTIONS => Gearboxes and axles => Topic started by: SwissWillys on June 01, 2024, 04:22:41 PM

Title: CJ3B - clutch pedal free play
Post by: SwissWillys on June 01, 2024, 04:22:41 PM

Hi everyone,

I replaced the clutch pedal on my Jeep cj3b and fitted the pedal with the appropriate felt spacers. Today, I started the engine, put it in gear, and then slowly released the clutch pedal... unfortunately, nothing happened at all - the gear is engaged, but the engine just continues to run without any effect... I assume it has to do with the clutch pedal free play. Does anybody know what the right adjustments are?
Best regards,
Jonas

Title: Re: CJ3B - clutch pedal free play
Post by: Rus Curtis on June 10, 2024, 03:27:45 PM

First make sure everything is connected.  Is the cable pulling on the fork?