My Willys 3A and 3B Community

3A, 3B, DJ Technical Knowledge Base => "Original"-- Technical Questions, Answers, Observations => Topic started by: Mayberry on May 27, 2022, 09:06:04 AM

Title: Bell housing identification?
Post by: Mayberry on May 27, 2022, 09:06:04 AM

Is this a stock T90A bell housing for a CJ3A?

Title: Re: Bell housing identification?
Post by: Mark W. on May 27, 2022, 02:58:14 PM

I believe so. An early one before the M-38 style with the 6) 5/16" bolt holes on the sides took over.

Title: Re: Bell housing identification?
Post by: 1955CJ-5 on May 28, 2022, 03:41:20 PM

This is a picture of the bell housing on my '51 CJ-3a......the hole spacing is a little different...

Title: Re: Bell housing identification?
Post by: athawk11 on May 28, 2022, 10:14:51 PM

Looks like a CJ3B/early CJ5 bell housing.  This is mine.

(https://www.mywillyspics.com/images/2017/10/11/image_zpsa471f18f.jpg)

Title: Re: Bell housing identification?
Post by: Bob W on June 01, 2022, 07:45:47 PM

Quote from: Mayberry on May 27, 2022, 09:06:04 AM

Is this a stock T90A bell housing for a CJ3A?

What is the serial number of your CJ-3A?