My Willys 3A and 3B Community

TECH FAQ SECTIONS => BODY and trim => Topic started by: willys522000 on March 18, 2022, 10:23:25 AM

Title: floor pan measurement
Post by: willys522000 on March 18, 2022, 10:23:25 AM

Does anyone have the measurement from the front of the rear floor riser to the toe angle of the floor board.  I set up my riser and am getting some variation on the measurement, wondering if my riser is not square??  Seems to be too far back on the right side "wheel well lip is forward of where it should be"


Thanks,

B

Title: Re: floor pan measurement
Post by: Rus Curtis on March 18, 2022, 11:58:35 AM

Sadly, that area is where I believe the body shop deviated on my jeep (ended up with an extra 1/2" total body length. 

Hopefully, someone can grab a quick measurement on theirs.  It has to be the same all the way across even if the passenger side is covered up by the tool box.  I can't imagine that riser having different distances.