My Willys 3A and 3B Community
3A, 3B, DJ Technical Knowledge Base => "Original"-- Technical Questions, Answers, Observations => Topic started by: labros_z on May 20, 2021, 04:54:44 AM
-
Hello everyone,
Yesterday I was under my CJ3B to grease it and I noticed what looks like a bolt missing from the transmission housing (see attached picture).
I have no idea if there was a bolt before or not as it's the first time I am checking the Jeep since I inherited from my father.
Furthermore there was oil where that missing bolt is, not a lot but just a few drops. Should there be a bolt there?
The jeep has a hard time shifting and I suspect the clutch is damaged/worn out but I haven't found the time to take the transmission down and inspect it.
Also I can't find the model number of the transmission so if anyone can tell where to look for it it will be of great help.
Thank you!
-
There shouldn't be any oil in the bellhousing so I strongly suspect your rear main seal is leaking. Worn rings or a non functioning PCV system are high on the suspect list contributing to leaking engine seals, in addition to the seals themselves. That drain boss is probably threaded for a NPT pipe plug but it is probably best left out if you are leaking oil there. Engine oil on clutch plates is not something you want.
-
Thank you duffer,
A lot of things are problematic with this engine and most likely I will be looking to swap it for something better.
I will keep using the jeep this summer while being careful with the gear changes and take it apart in the winter to assess the damage.