My Willys 3A and 3B Community
TECH FAQ SECTIONS => EVERYTHING ELSE, General tips => Topic started by: Mytwojeeps2020 on March 12, 2021, 06:01:31 PM
-
Just wondering what kind of a bottle jack you are carrying, if you are, for street tire changes. I have one of those big, honking “Jeep Jacks,” but don’t want to mount it on my new CJ. What I’m looking for is a bottle jack I can stow in the toolbox ) along with a wooden “plate” on which to mount it). BTW, I’m running 15” tires. Any suggestions? Thanks!
-
I don’t carry a bottle Jack. I carry a scissors jack. It weighs less, never leaks oil, and always works. Plus, at its retracted height it’s much shorter than a bottle jack. BW
-
I "quoted" 'cause neither posts were visible- in case others can't see.
Just wondering what kind of a bottle jack you are carrying, if you are, for street tire changes. I have one of those big, honking “Jeep Jacks,†but don’t want to mount it on my new CJ. What I’m looking for is a bottle jack I can stow in the toolbox ) along with a wooden “plate†on which to mount it). BTW, I’m running 15†tires. Any suggestions? Thanks!
I don’t carry a bottle Jack. I carry a scissors jack. It weighs less, never leaks oil, and always works. Plus, at its retracted height it’s much shorter than a bottle jack. BW
Back when I got my jeep (1977), before all this network we have at our fingertips, I had no jack at all. I purchased this bottle jack to carry with. I had access to two scissors jacks at home but both were bigger than this. So, at home the scissors jacks came out. On the road this is what I used. I have 15" tires and this lifts high enough. I also carried a rock around for an emergency chock as well.
I was fortunate to never having to use it on soft ground. A plate would be a good idea.
-
I have 20 ton bottle jack and carry a piece of plywood 12" x 12" , 2 - 4x4x12" and 2-2x4 1 foot long. I have a HI lift also 48 inches disassembled in the cab if I need it . It only takes a minute or two to put together.
Why do I have a 20 ton bottle jack ? I have several laying around that I used to level house's with.
Any 2 to 20 ton bottle jack will work with a couple of pieces of wood. One day I will probably buy a smaller one but for now I use what I have.
-
I made a rack/tray behind the battery bracket bolted on the frame where I clamp down an Astro minivan scissors jack, the ratchet and lug wrench that came with it, and two angle iron pieces for tire chalks drilled and a bolt thru them. No rattles or lose parts bouncing around. I bolted a differential "bump stop" on the jack surface for 2" higher capacity and a cushion for my paint too. I have 15" rims and use the spring mount plate position to jack it up at the wheel. The plate is a good idea. Now where to keep it?
-
I carry a bottle jack, a high lift jack and a shovel. Many times it is better to dig out to fit the spare on than to raise the Jeep higher.
-
Aha! So that’s “plan B”! 😆 BW
-
Or Plan C:
Forget buying either type jack and get a roadside assistance rider on my insurance!
-
How about both in one, a "screw bottle jack"... (no connection, just found it an interesting compromise of OLD, and no fluid failures)
https://www.ebay.com/itm/Vintage-Automotive-Screw-Bottle-Jack-Model-T-or-A-Era/164340464130?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160908105057%26meid%3D27275ec8469e47a29346a2f285cff876%26pid%3D100675%26rk%3D1%26rkt%3D15%26mehot%3Dnone%26sd%3D164340464130%26itm%3D164340464130%26pmt%3D1%26noa%3D1%26pg%3D2380057%26brand%3DUnbranded&_trksid=p2380057.c100675.m4236&_trkparms=pageci%3Af45fd878-84d3-11eb-a6c7-52cf26ed05cd%7Cparentrq%3A313338a61780a77dccd5b204fffe91c8%7Ciid%3A1