My Willys 3A and 3B Community

TECH FAQ SECTIONS => BODY and trim => Topic started by: tow hook on January 28, 2021, 02:33:43 PM

Title: vacum wiper motor rebuild
Post by: tow hook on January 28, 2021, 02:33:43 PM

who has re done your tri co vacuum wiper  motor ? any tips, or suggestions for places to get a good kit ?


 thanks

Title: Re: vacum wiper motor rebuild
Post by: Rus Curtis on January 28, 2021, 05:15:53 PM

towhook,
I'm sure you've read here:

https://cj3b.info/Tech/Wipers.html

Just recently, there was an in-depth thread over on the 2A Forum:

https://www.thecj2apage.com/forums/search_results_posts.asp?SearchID=20210128220710&KW=wiper

I've not opened all the links contained but there is a lot there (I had mine rebuilt a while back) and may one day need to review in more detail.

Title: Re: vacum wiper motor rebuild
Post by: tow hook on February 02, 2021, 10:34:56 AM

thanks, i'll read up on thosed

Title: Re: vacum wiper motor rebuild
Post by: Scott Blystone on April 15, 2021, 01:08:44 PM

If you don't have broken parts, do it yourself.  You need some vaseline and thin gasket paper.  Go slow, clean it, lube it. It isn't hard to do.

Title: Re: vacum wiper motor rebuild
Post by: tow hook on April 21, 2021, 01:54:59 PM

thanks, i called www.wiperman.com and he doesn't touch them at all, he had a few pass side units nos 219$ each . i tryed walcks, and he has a pile of cores and no one to do them.