My Willys 3A and 3B Community
TECH FAQ SECTIONS => BODY and trim => Topic started by: SteveW on December 06, 2020, 01:48:32 PM
-
I have second tailgate for my 3a. i have one that will take 2 jerry can holders but with them off I have 8 holes showing. Bought another tailgate to have for that. It needs a lot of work and one thing was a big bow in top of it. I put a 4' ground rod through the tubing. Made a yoke of plywood and a cross piece of 2x4 and wood on bottom to spread load out, Put a small 2 ton bottle jack and viola straightened the tubing with no kinks.
(http://www.surfacezero.com/g503/data/2677/medium/P1040005.JPG)