My Willys 3A and 3B Community
3A, 3B, DJ Technical Knowledge Base => "Modifications"-- Technical Questions, Answers, Incites => Topic started by: DavidF on August 02, 2020, 11:36:50 AM
-
I’m sure I used to know this, but do they share oil? It’s a pain to access the t case fill on my b, just wondering if I can overfill the transmission a smidge.
Thanks, Dave
-
I’m sure I used to know this, but do they share oil? It’s a pain to access the t case fill on my b, just wondering if I can overfill the transmission a smidge.
Thanks, Dave
David,
Do you have a T98 on your 3B? I know the T90 shares oil on mine, but know nothing about the T98.
-
Yes, I swapped it in from a cj6 a few years ago. I pretty much never use first gear, but use second as its synchronized. Not sure if I’d bother swapping it now
-
Yes, I swapped it in from a cj6 a few years ago. I pretty much never use first gear, but use second as its synchronized. Not sure if I’d bother swapping it now
(I'm quoting because your posts aren't visible and in case others want to see without logging out, like I need to, I quote to copy your posts)
David,
This helped. I don't often reference my late Service Manual, SM-1046, but bought it as it covered CJ-3B also (plus CJ-5/5A and CJ-6/6A and the DJs too). Sure enough, there was a section on the 4 speed T98. I didn't see anything in that section, J1, that mentioned lubrication. Checking the B section however, I found a note at the bottom of the page associated with the directions for lubricating the transmissions on the 4WD vehicles page.
8. Transmission:
3 Speed.....
4 Speed °..... (notice the degree symbol)
At the bottom of the page the explanation:
" ° 4-Speed transmission and transfer case require separate lubrication of each unit."
Both list GL-4 80wt. or 90wt.
Not what you wanted to read, I know. If someone else knows differently, hopefully they check in.
-
The T98-A is sealed between the transmission and transfer case.
The seal is actually located in the transmission to transfer case adapter plate.
-
Thanks everyone, i'll check them separately. I appreciate the help.
i need to redo my exhaust anyways, maybe i'll add a drop out section to make it easier