My Willys 3A and 3B Community
3A, 3B, DJ Technical Knowledge Base => "Original"-- Technical Questions, Answers, Observations => Topic started by: Orig Equipment on May 15, 2020, 09:30:42 PM
-
A while back on the old 3B page, there was a thread about taking shifter knobs off and a general discussion about the quality of rubber shifter boots. Down in the thread, (which I can't find now) someone said they knew of or had a pattern to make canvas boots. Does anyone remember this? I would like to get in touch with the person and could I get a set of those canvas patterns?
Thanks Orig Equipment
-
Orig Equipment,
For your entertainment:
https://www.tapatalk.com/groups/cj3b_bulletin_board/viewtopic.php?p=44412#p44412
https://www.tapatalk.com/groups/cj3b_bulletin_board/t-case-shifter-boot-replacement-t2705-s10.html
and the one that takes you to the 2A thread with the patterns:
https://www.tapatalk.com/groups/cj3b_bulletin_board/viewtopic.php?p=29492#p29492
just in case, the direct link:
https://www.thecj2apage.com/forums/shift-boot-drawings_topic23205.html
Ken found some on Ebay, and other vendors like Beachwood and KW has some. I really kinda like the idea of making one. BTW, I read a thread over there where one guy cut a hole in two fingers of a leather glove to make a boot.
HTH
-
Rus,
Many thanks, that is the exact thread I was remembering. The 54OB does not even have a scrape left of the boots. Have not tried to take the knobs off yet, but I can sure hear that transmission sing without boots on. Thanks for digging that up for me. I will let everyone know how they turn out!
Jeff Thomas
-
Cool!
-
Rus:
Sorry to be a newbie, I hit the link you sent me and since I am only a member of this page, I could not personal message JeepRoger. I guess I join the 2A forum, but I don't think I will be picking up a 2A anytime soon. Do you have an email that I could use to contact him or you could give him mine jefflaw@bainterlaw.com and have him shoot me an email so I can get the patterns from him.
I would appreciate any help you could give.
Thanks Jeff T.
-
Jeff,
I sent him a PM. The timer is ticking.......
-
Thanks man.
-
He's got them on his website. I'd not been to this website in a looong time.
https://siminoffjeeparts.com/
Click on the "Shop" link at the top. You'll see the plans there.
Good luck.
-
The Website is good, placed my order and the patterns are on the way! Thanks Rus.
That tight steer system he has to take the play out of the Ross steering box looked interesting.
Thanks for all your help, I will post photos when I get my boots made!
Jeff Thomas
-
Nice leather boots here.
https://www.strongholdshiftboots.com/shop?fbclid=IwAR0zTIl8YK717gsn_tSXhBU8H-kiiGAcZMyakIunJFbW54uJIzS7C1NbgCo&undefined=Twin-Stick%20Boots