My Willys 3A and 3B Community

TECH FAQ SECTIONS => Engine compartment => Topic started by: aboyandhisdog on March 14, 2020, 03:55:31 PM

Title: Head Gasket spray?
Post by: aboyandhisdog on March 14, 2020, 03:55:31 PM

I'm putting a new Fel-Pro 7285B head gasket on.  That is the one that is metal on the block side and fiber on the head side.  I know there have been some alignment issues in the past where the gasket runs between the cylinders, but it looks like Fel-Pro has ironed those out as the alignment and coverage look to be perfect. 

I plan to use the copper coat and want to know if it is wise to spray the fiber side with copper, or just the metal side?

Thank you.

Title: Re: Head Gasket spray?
Post by: Bruce_W on March 14, 2020, 08:10:50 PM

I spray both sides. BW

Title: Re: Head Gasket spray?
Post by: athawk11 on March 14, 2020, 09:32:03 PM

Quote from: Bruce_W on March 14, 2020, 08:10:50 PM

I spray both sides. BW

X2.