My Willys 3A and 3B Community

3A, 3B, DJ Technical Knowledge Base => "Original"-- Technical Questions, Answers, Observations => Topic started by: bverboy on March 16, 2017, 07:13:51 AM

Title: felt gaskets
Post by: bverboy on March 16, 2017, 07:13:51 AM

where do the go on a dana 18 transfer case??  they were in my kit in a separate bag

Title: Re: felt gaskets
Post by: 1955CJ-5 on March 16, 2017, 11:13:57 AM

Are they the donut shaped felt rings?

If so they go behind the dust shields on the splined drive shaft yokes before you slip the yoke on the front and rear output shafts.

Doug shows a picture about half way through the presentation..

http://www.cj3apage.com/index/Tech_Tips/DougHD-18TransfertCase.htm

Title: Re: felt gaskets
Post by: bverboy on March 18, 2017, 06:45:03 AM

thank you