My Willys 3A and 3B Community

3A, 3B, DJ Technical Knowledge Base => "Original"-- Technical Questions, Answers, Observations => Topic started by: specialty on July 21, 2016, 03:50:16 PM

Title: T-98 or T-18 4 speed transmission swap
Post by: specialty on July 21, 2016, 03:50:16 PM
I can get this transmission pretty cheap and was wondering if it can be put into a cj3a. The owner says it a bolt up except for a new pilot bearing for the shaft to line up. Has anyone ever done this swap? 1st and reverse are granny gears and 2-4th are synchronized. A 4 speed sounds nice.
Title: Re: T-98 or T-18 4 speed transmission swap
Post by: johnrb3b on July 22, 2016, 11:02:45 AM
Go to Herm the Overdrive Guy's site
He has a bunch of info on various transmissions and what it takes to put them in various Jeeps
Title: Re: T-98 or T-18 4 speed transmission swap
Post by: specialty on July 23, 2016, 08:29:22 AM
I have been doing a little checking and it looks like more trouble than whats it's
worth.
Title: Re: T-98 or T-18 4 speed transmission swap
Post by: Lee on August 19, 2016, 10:20:35 PM
Unless your rock crawling you really do not need it. It will not bolt up on either end unless this was from a real 4 cyl, 4 speed cj5. With adapters it can be done, and extensive floor mods, crossmember alterations, driveshaft shortening/lengthening.

Lee ;)