My Willys 3A and 3B Community

3A, 3B, DJ Technical Knowledge Base => "Original"-- Technical Questions, Answers, Observations => Topic started by: specialty on May 10, 2016, 07:47:52 AM

Title: pinion seals help
Post by: specialty on May 10, 2016, 07:47:52 AM
Are the pinion seals the same on the front and rear Dana 44 and 25's? I get the NAPA and Advance Auto number as 15788 for both. Is this correct? If not what is the Dana 44 number or am I wrong on both? Thanks
Title: Re: pinion seals help
Post by: aboyandhisdog on May 11, 2016, 11:47:13 AM
I used the #5778 or 5778V (vitron) for the Dana 44.  That is a National part #.  It crosses to the Willys #639265.  The front and rear appear to use the same seal.
Title: Re: pinion seals help
Post by: specialty on May 11, 2016, 12:49:40 PM
Quote
I used the #5778 or 5778V (vitron) for the Dana 44.� That is a National part #.� It crosses to the Willys #639265.� The front and rear appear to use the same seal.

After I called NAPA that is what the man told me. He said the must both use the same seal. Thanks for your help.
Title: Re: pinion seals help
Post by: Ryan_M on May 11, 2016, 01:11:29 PM
Dana 25 & 44 use the same pinion seal.
Title: Re: pinion seals help
Post by: specialty on May 11, 2016, 04:24:55 PM
Quote
Dana 25 & 44 use the same pinion seal.

Thanks Ryan, I need to replace my rear one but might as well do both when I get it on a lift.