My Willys 3A and 3B Community

3A, 3B, DJ Technical Knowledge Base => "Original"-- Technical Questions, Answers, Observations => Topic started by: specialty on January 27, 2016, 04:12:29 PM

Title: Donaldson air filter disassembly
Post by: specialty on January 27, 2016, 04:12:29 PM
Has anyone ever disassembled a Donaldson oil bath filter? I want to get rid of the oil bath mess and get this thing apart and find a dry element that will work with it. I know these are not to be disassembled but they went together so they have to come apart. I have searched and have only found a few places that look like a spot weld that I drilled but still no luck. Surely these elements over the years have been taken apart.
Title: Re: Donaldson air filter disassembly
Post by: garage gnome on January 27, 2016, 08:44:10 PM
I forget who, but someone did that here.
Title: Re: Donaldson air filter disassembly
Post by: aboyandhisdog on January 27, 2016, 10:45:20 PM
Gunslinger knows all about these filters - he works for Donaldson.  If he doesn't chime in, you may want to send him a PM.
Title: Re: Donaldson air filter disassembly
Post by: specialty on January 28, 2016, 02:03:17 AM
Quote
Gunslinger knows all about these filters - he works for Donaldson.� If he doesn't chime in, you may want to send him a PM.

It's not that I don't want to use the oil bath but my son when we were cleaning parts sand blasted it and now it's full of sand and no way to clean it out. I would be afraid to use it now so I thought I would try to put paper element in it to keep the original look. This Jeep will not be driven much anyway with my other Jeeps sitting around. More of a piece to sit in the garage to keep making it better and enjoy that classic look. Driven to town occasionally to keep cob webs blown out. Actually I plan to drive it to my shop on nice days occasionally this summer if I get it ready. Almost done with mechanical (I hope) and chassis work. I have already welded in panels and repaired the body as far as the metal work. Hat channels to go yet and then to the dreaded body work. Hope to get it painted this spring if all stays on track. Many, many hours spent since last summer on this but work has been slow thanks to this booming economy they keep talking about. ;D
Title: Re: Donaldson air filter disassembly
Post by: Ryan_M on January 28, 2016, 07:18:59 AM
Can't you swish it around in a bucket of kerosene to clean it out?

If not, I'd look at buying another complete filter from eBay or elsewhere. Probably cheaper and easier in the long run than having to replace paper elements.
Title: Re: Donaldson air filter disassembly
Post by: specialty on January 28, 2016, 09:00:05 AM
Quote
Can't you swish it around in a bucket of kerosene to clean it out?

If not, I'd look at buying another complete filter from eBay or elsewhere. Probably cheaper and easier in the long run than having to replace paper elements.

How would you ever know if all the sand was out? Nothing worse than sand to ruin a engine. Since I already had this element I thought I would experiment and see about a paper element, it sure would eliminate the mess associated with oil.
Title: Re: Donaldson air filter disassembly
Post by: Tumbleweed on January 28, 2016, 10:32:08 AM
I have converted my oil breather to accept a paper filter. I will take some pictures of the modification for you. I followed the instructions from one of the guys on the CJ2A page. My air filter replacement is NAPA 6179 and it fits perfectly into the cavity of the old oil filter. You have to rip the guts out of your oil filter and cut the metal out of the top portion to make a good fit. This is not hard at all you just need a cut-off wheel from a hand grinder.

When everything is put back together it looks stock.

Tumbleweed
Title: Re: Donaldson air filter disassembly
Post by: specialty on January 28, 2016, 11:46:13 AM
Quote
I have converted my oil breather to accept a paper filter. I will take some pictures of the modification for you. I followed the instructions from one of the guys on the CJ2A page. My air filter replacement is NAPA 6179 and it fits perfectly into the cavity of the old oil filter. You have to rip the guts out of your oil filter and cut the metal out of the top portion to make a good fit. This is not hard at all you just need a cut-off wheel from a hand grinder.

When everything is put back together it looks stock.

Tumbleweed

Thanks. So you need to just dig into the air cleaner and rip the stuff out first? I see no other way since I can't find where it is put together. At this point with all the sand it realy does not matter anyway. I just do not want to spend $150 for another unit. From what I have read a paper filter is a little better than the oil bath anyway, depending on who you're talking to. I will be looking forward to those pictures, thanks again.
Title: Re: Donaldson air filter disassembly
Post by: Tumbleweed on January 28, 2016, 01:50:40 PM
You bet, there are also replacement filters a little cheaper than nthe NAPA 6179. I just purchased a new filter from Autozone that was about 2 - 3 dollars cheaper. I have also seen K&N filters installed in the Donalson but I don't know if that is worth the extra $. I actually have a bypass filter on my '53 wagon with the K&N filter and it looks neat. If I want to use the oil breather I just disconnect the K&N and put the flexible tube in place.

I'll send the pictures in the morning.
Title: Re: Donaldson air filter disassembly
Post by: Tumbleweed on January 28, 2016, 02:45:29 PM
Hey specialty,

I found some pictures of the filter modification procedure that I used. I did not have to add any spacers or rubber spacers to make my filter fit. If you have any doubt I would take your gutted filter to you auto parts shop and get a filter to fit but the filter number I gave you worked in mine. I'll still send pictures in the morning.
Title: Re: Donaldson air filter disassembly
Post by: specialty on January 28, 2016, 07:13:00 PM
Looks simple enough. I will check out that filter. Thanks
Title: Re: Donaldson air filter disassembly
Post by: specialty on January 28, 2016, 07:18:43 PM
Looked the NAPA filter up. $6.99 is cheap enough. I was looking for it to be more expensive.
Title: Re: Donaldson air filter disassembly
Post by: johnrb3b on January 29, 2016, 10:34:54 AM
Here's another variation on the theme.

http://www.42fordgpw.com/mods2.html
Title: Re: Donaldson air filter disassembly
Post by: aboyandhisdog on January 29, 2016, 11:22:02 AM
George, great photos - do you have any that take it a bit further showing the fitment of the filter into the housing and the end result?  I'm having a little trouble getting my head around how this actually works exactly.   :P
Title: Re: Donaldson air filter disassembly
Post by: Austin on February 02, 2016, 07:02:40 PM
I was just wondering if the top part of that air filter just sits on top for the body or if there is something that latches it together. Also, is there a gasket between.

Thanks,
Austin
Title: Re: Donaldson air filter disassembly
Post by: specialty on February 03, 2016, 05:33:20 AM
Quote
I was just wondering if the top part of that air filter just sits on top for the body or if there is something that latches it together. Also, is there a gasket between.

Thanks,
Austin

I have seen where some use those rubber toilet rings for gaskets however I am not sure about this set-up. It would have to have a seal of some sort.
Title: Re: Donaldson air filter disassembly
Post by: Tumbleweed on February 05, 2016, 04:34:39 PM
Hey guys,

I've been way out of town - up in NH area - I'll get some pictures together showing fit and such.

Title: Re: Donaldson air filter disassembly
Post by: specialty on February 08, 2016, 04:55:29 AM
To cold up there for me. Hillary only makes it worse!
Title: Re: Donaldson air filter disassembly
Post by: Tumbleweed on February 08, 2016, 11:26:05 AM
More pictures of my air filter conversion. The filter itself measures 5 5/8" outer diameter. The inside measurement of my filter is approx. 5 3/4". It will slide up into the breather compartment really easy. If you want to get a tighter fit just wrap some electrical tape or duct tape around the paper filter up close to the top. I usually wrap about 6 times around to get a snug fit. The filter will only go so far in before it stops. I placed a foam piece in the bottom oil cap. The foam was about 2" thick when it was new. When you install it into the bottom oil cap it will fit very snug once you clamp the oil cap to the breather housing. On the dusty trail at FCT the air filter really caught a lot of dust. I did not see anything in the housing that would indicate dust bypassing the filter. This works for me and I hope that long term it does the job but I see no issues as long as you change filers after a dusty ride.
Title: Re: Donaldson air filter disassembly
Post by: aboyandhisdog on February 08, 2016, 03:37:40 PM
Very helpful George, thanks!  I'm trying this conversion right now.  Currently, the oil in the bottom of my filter gets very little dirt in it, while my engine oil seems to get black after only several hundred miles.  Hoping this will allow for a lot cleaner air to get into my engine.  Shame to have to cut this apart though - seems they could have made it to come apart for cleaning. 
Title: Re: Donaldson air filter disassembly
Post by: Tumbleweed on February 08, 2016, 03:50:23 PM
I agree, I didn't like the idea of destroying the inside of the filter either. My wagon still has the original oil filter but I bypass it with one of those fance K&N filters. I can always go back. I didn't change oild after FCT and my oil is still very clean. Of course I only have 400 miles on the odometer!

Are you using 15W-40 Rotella Diesel Oil?

I found that I get better oil pressure with this compared to 30W conventional oil.

I'm sure you can buy a filter housing from someone if you do decide to go back to an oil breather. Maybe Bruce has an old one for sale that you can convert!

Good luck.......

George

Title: Re: Donaldson air filter disassembly
Post by: aboyandhisdog on February 08, 2016, 04:02:43 PM
Quote
Are you using 15W-40 Rotella Diesel Oil?


No, as usual I'm the odd man out.  I have been a Mobil 1 guy for 40 years.  The 10W-40 High Mileage works great in this old Willys. 
Title: Re: Donaldson air filter disassembly
Post by: specialty on February 08, 2016, 07:27:32 PM
Thanks Tumbleweed, That's my plan since  have sand in my original filter and most likely never get it all out. I see no reason why this would not work as good or better than the original.