My Willys 3A and 3B Community

3A, 3B, DJ Technical Knowledge Base => "Original"-- Technical Questions, Answers, Observations => Topic started by: SteveW on August 24, 2014, 02:42:49 PM

Title: Walck's finding parts
Post by: SteveW on August 24, 2014, 02:42:49 PM

Putting an order together and 2 things I can't find on their site.1 is an oil pump gasket. 2 is a temperature gauge. Trying the different sub sets and search function and no luck. Someone please if they can put up the link from thier site to these items. Found other stuff. It's the early type oil pump.

Title: Re: Walck's finding parts
Post by: bretto on August 24, 2014, 03:08:26 PM

I couldn't find a gasket but I bet if you just call him he'll have one or just make your own.
Heres a temp gauge.
http://walcks4wd.com/temperature-temp-gauge-mb-gpw-cj2a-1941-1948.html

Title: Re: Walck's finding parts
Post by: Bob W on August 24, 2014, 03:49:42 PM

I find it's best just to give them a call. They always have stuff that hasn't made it to the internet catalog yet. And you can discuss the parts and ask questions. Carl and Dan are great guys and very knowledgeable.

Title: Re: Walck's finding parts
Post by: SteveW on August 24, 2014, 09:30:30 PM

I had found the temp gauge before but couldn't this time and was close to defining insanity. I will call but would have been nice to just have completed the order on line and sent it in.

Title: Re: Walck's finding parts
Post by: SteveW on August 25, 2014, 03:57:05 PM

Ordered by phone today and they do have the gasket and also the temp gauge I am getting is correct for my 3a but not the same as what they list.

Title: Re: Walck's finding parts
Post by: Carls_jeep on August 26, 2014, 12:36:09 PM

A call to Walcks is best. They can get the exact part you need rather than guessing using the online catalog, which is not complete.