My Willys 3A and 3B Community

3A, 3B, DJ Technical Knowledge Base => "Original"-- Technical Questions, Answers, Observations => Topic started by: 1955CJ-5 on August 05, 2014, 04:47:30 PM

Title: Oil filter crush washer?
Post by: 1955CJ-5 on August 05, 2014, 04:47:30 PM
I found a picture in the parts book but no description...

What do you use and where do you get that crush (?) washer that� seals between the oil filter housing cap and the threaded hex-head tube thing that holds the cap on?

I ordered some but they are too large....these need to be about .425 or so ID.....I'm using a copper brake washer now but I had to enlarge the hole..

Maybe there are more than one size?

Randy
Title: Re: Oil filter crush washer?
Post by: Carls_jeep on August 05, 2014, 06:06:11 PM
If you do a google search for copper washers you will find anything you want. Have you tried doing that?
Title: Re: Oil filter crush washer?
Post by: 1955CJ-5 on August 05, 2014, 07:06:04 PM
Are they just copper washers then, not crush washers? I'm sure I can find copper washers. I tried a search for willys and fram oil filter crush washers but maybe that's too specific..
Title: Re: Oil filter crush washer?
Post by: garage gnome on August 05, 2014, 07:14:37 PM
My jeep doesn't use a crush washer. It is more like a gasket.
Title: Re: Oil filter crush washer?
Post by: 1955CJ-5 on August 05, 2014, 07:44:18 PM
Hmm...Well mine leaked..or maybe geysered is a better description when I first started it...what a mess...so I'm a bit leery of it.. I think i tried a fiber washer but that didn't work...I've got the copper one now and it's working, but I've got it pretty darn tight....

Is your washer rubber or just gasket material?