My Willys 3A and 3B Community

3A, 3B, DJ Technical Knowledge Base => "Original"-- Technical Questions, Answers, Observations => Topic started by: Westfield_willy on July 02, 2014, 04:22:03 PM

Title: 1952 CJ3A
Post by: Westfield_willy on July 02, 2014, 04:22:03 PM
My CJ3A has the oil filter mounted to the drivers side fender. It's the only one like this I have seen. Is this unique, and/or correct?
Title: Re: 1952 CJ3A
Post by: Operation Overlord on July 02, 2014, 05:05:44 PM
My 49 has the oil filter mounted this way too.� Correct me if I'm wrong, but somewhere I read that owners moved them there to accomodate frontal hydraulic accesories. My 3a came from Minnesota where I think it was used to plow snow with a hydraulic type setup.
Title: Re: 1952 CJ3A
Post by: Ryan_M on July 04, 2014, 03:18:48 PM
Quote
My 49 has the oil filter mounted this way too.� Correct me if I'm wrong, but somewhere I read that owners moved them there to accomodate frontal hydraulic accesories. My 3a came from Minnesota where I think it was used to plow snow with a hydraulic type setup.

You are correct. The fenders were a convenient spot to relocate oil filters to in order to make room for a hydraulic pump.
Title: Re: 1952 CJ3A
Post by: SteveW on July 06, 2014, 02:07:23 PM
Going to an an alternator also means finding another place for the filter to be moved to. That is where my filter was although I made a different bracket for it. I have kept the alternator set up.