My Willys 3A and 3B Community
3A, 3B, DJ Technical Knowledge Base => "Original"-- Technical Questions, Answers, Observations => Topic started by: athawk11 on May 03, 2014, 09:22:34 AM
-
(http://i1195.photobucket.com/albums/aa397/athawk11/athawk11%20Willys%20White/70ac6faa0b4241a6820ed53c0b5162be_zps32ef04ae.jpg)
This pump leaks fuel from the holes indicated with the blue arrow.� Some reading leads me to believe this has a ruptured diaphragm.
Looking for a consensus from the group.� Time to rebuild?� Or is this thing a gonner?
Tim
By the way, the thing pumps fuel like a grape ape, so I'm a little confused.
-
I agree...ruptured diaphragm.....I think it will also allow fuel into the oil pan....
or,
I understand that some of the AC pumps had the plunger fastened to the diaphragm with a nut and washer, others were peened.� Maybe the nut came loose and is allowing a little fuel to leak by? The top will come off pretty easily( 6 screws) for inspection..you might get lucky...
Kits available here...
http://www.classicpreservation.com/fuelpumpkits.html
-
Thanks for the link Randy.
I did get a hold of Hal. Decent price. $53.00 for a rebuild kit. Made in the USA with parts that hold up the the alcohol rich fuels.
I am going to get one and rebuild this pump, but it will end up on my OD Willys. I picked up an Airtex reproduction pump for Whitey. Looks pretty good, and seems to work well.
Tim
-
Good choice...once installed you probably won't be able to tell the Airtex from the AC...
When I did my pump, I found that the diaphragm removal(from the push rod) and re-install was probably THE most frustrating part of the entire restoration,after the windshield install of course...
Hal offers a service where you send in your old diaphragm and push-rod and he will install the new ones, out of your new rebuild kit.....IF your pump has the peened type diaphragm I would personally let Hal do it....if they are the nut-and-washer type then no problem....even a caveman could do it ;D
-
I got an Airtex over a year ago and can't say I have any problems with it. I can't compare it to anything, but my M38 still moves forward. I don't know about the performance of the vacuum function, I don't have a top and I don't feel like getting wet. :)
Oh bubba said, JB a weld will seal those holes up ;D
-
Hey Tim,
Have you done anything on the fuel pump yet? I read your post in the High Altitude thread and am starting to think that a spare pump would be a good idea....but I suppose a parts store single action replacement would be a good enough backup....
-
Hi Randy,
I installed an Airtex on the Whitey project.� I have the rebuild kit from the Classic Preservations folks.� I plan to rebuild the original, then install it on my OD Willys.� �Just not a huge priority right now.� By the way, thanks again for that link.
The Airtex is a reasonably priced option for a decent backup.� It has the same vacuum and fuel hook ups as the original, so it would've pretty easy to install while in the field.� A single action pump would also work in a crunch, but you would also want to have provisions to close off your existing vacuum lines.�
I think it was just a bad run of luck on that FCT trip last year.� I believe it was Jpet that had two different pumps installed while on the same trail. Both were brand new after market single action pumps.� Crazy.
Tim
-
Thanks Tim,
I probably should just get the original rebuilt...or do it myself....The originals are so much easier as they have a valve retainer that is screwed on, rather than the Airtex where the casing is distorted with a punch to hold the valves in....I still would have Hal do the diaphragms...
Something else to put on the list....
Randy