My Willys 3A and 3B Community

3A, 3B, DJ Technical Knowledge Base => "Original"-- Technical Questions, Answers, Observations => Topic started by: Quebec Jeep on June 11, 2014, 01:48:38 PM

Title: Original or not mirror driver side?
Post by: Quebec Jeep on June 11, 2014, 01:48:38 PM
I broke the side mirror that was on my 3A and I'm sure it was not original.
So I found one on jeep-bay (ebay!) and now I'm not even sure that's an original or not.

What do you think? (first three pics)

Pics 4 and 5 are the one that I broke...

The last pics is the rear mirror. Is it original? The mirror is now kind of fade due to its age. I though I can glue a new mirror on it. Good or bad idea?

Title: Re: Original or not mirror driver side?
Post by: athawk11 on June 11, 2014, 05:05:01 PM
Hi Pascal,

The Ebay purchase does not look right.  The mirror head looks okay, but the mounting bracket and arm aren't right.

The mounting bracket on your original looks to be correct.  The arm is a bit too long.  The rectangle mirror is not correct for the 3A.

You could use the existing mounting bracket, the long arm and the round mirror, and be pretty close to original.

I believe the rear view mirrors were optional on a 3A.  The shape of the mirror and housing look right to me, but the mounting bracket does not.
Title: Re: Original or not mirror driver side?
Post by: 1955CJ-5 on June 11, 2014, 07:38:55 PM
The bracket and arm on the mirror that you broke look exactly like the one that was on my 51...I had to buy a 5" round mirror from one of the military jeep suppliers..I forget which one, but the mirror itself looks exactly like your new purchase...

As for the rear view mirror, I got a bracket from ebay I think, it was said to be NOS..at least it is well made. The mirror as Tim said could be any period mirror..yours looks fine.....I found an "accessory" period mirror on ebay
Title: Re: Original or not mirror driver side?
Post by: Quebec Jeep on June 12, 2014, 08:25:40 AM
Someone told me that the one I bought on ebay is for a military one. MB or GPW. I can't find any F script on it so far. More I look at it, more I'm convinced that it's an aftermarket.

What would be the proper arm length?

For now, I will paint the round mirror and put it on my existing bracket and arm.

Here is more pics about the rear mirror. It is so rusty that I though it was original...