My Willys 3A and 3B Community

3A, 3B, DJ Technical Knowledge Base => "Original"-- Technical Questions, Answers, Observations => Topic started by: James P on May 27, 2014, 07:00:54 PM

Title: Generator and starter Paint colors
Post by: James P on May 27, 2014, 07:00:54 PM
Okay I have done the crazy and completely dissembled the generator and am in the process of rebuilding it and then will be moving on to the starter when I finish. Now I have hit a bit of a snag as I am working on this. What is the original color of the Auto-lite Generators? Also what type of paint do you use that can handle the heat but also will not come off if oil and water get on to the generator ( sorry it is a Jeep it will happen).
Yes pictures will come when I finish it.
Title: Re: Generator and starter Paint colors
Post by: Ryan_M on May 27, 2014, 07:20:27 PM
Here's an original one I took out of the box for the first time last year. Color is black.

Title: Re: Generator and starter Paint colors
Post by: James P on May 27, 2014, 08:18:22 PM
Thanks now just to figure out what type of paint to use. :)
Title: Re: Generator and starter Paint colors
Post by: Ryan_M on May 27, 2014, 08:39:20 PM
Quote
Thanks now just to figure out what type of paint to use. :)

I'm sure there will be more sophisticated solutions from other members but regular ol'  Rustoleum black has held up pretty well on mine so far.
Title: Re: Generator and starter Paint colors
Post by: 1955CJ-5 on May 27, 2014, 09:38:27 PM
I used Duplicolor engine paint.....so far I like it....I used it on the transmission, engine, starter/generator and the oil filter canister....so far so good..it's supposed to withstand 500* which might be a little optimistic...but it has withstood the oil and water spills...

Eastwood sells a two-part epoxy that has a special 2 part aerosol can...expensive though

As always two part auto paint with a hardener would probably be best if you have the equipment......
Title: Re: Generator and starter Paint colors
Post by: Kirkski on June 11, 2014, 08:00:42 AM
I would love to see any pics of the disassembly I am thinking about doing mine. I have a price of $75 each from a local armature shop, not sure of what I would be getting into�
Title: Re: Generator and starter Paint colors
Post by: James P on June 11, 2014, 08:01:36 PM
I have pictures of the disassemble of the starter over on my rebuild page but unfortunately, I failed to take pictures when I did the generator. I ended up using the Dupli-color engine paint in a semi gloss black.