My Willys 3A and 3B Community

3A, 3B, DJ Technical Knowledge Base => "Original"-- Technical Questions, Answers, Observations => Topic started by: Tumbleweed on June 10, 2014, 05:10:58 PM

Title: Radiator Assembly to Frame
Post by: Tumbleweed on June 10, 2014, 05:10:58 PM
On the bottom mounted radiator, were there rubber pads to fit between the radiator and frame? I can't remember if I took 2 pads off.

Thanks,

George
Title: Re: Radiator Assembly to Frame
Post by: athawk11 on June 10, 2014, 10:39:57 PM
Hi George.� Good to see you back in the saddle.

There are pads on the bottom mount radiators.� The only Willys I have that still has the original pads is the '46 2A.� They appear to be a little thicker than 1/4", and are made of the same material as the tub mounts.�

For ODie and Whitey, I used the cut up side wall of an old ply tire.� I believe the idea is to cushion the radiator, and at the same time, center the fan on the radiator shroud.� Adjust the pad thickness to achieve this centering.

Hope this helps.

Tim
Title: Re: Radiator Assembly to Frame
Post by: Tumbleweed on June 11, 2014, 09:43:04 AM
Thanks Tim,

This is very helpful information. I'm glad to be working on the 49 again!

George