My Willys 3A and 3B Community

3A, 3B, DJ Technical Knowledge Base => "Original"-- Technical Questions, Answers, Observations => Topic started by: Gunslinger on March 28, 2014, 09:40:09 PM

Title: Body dimensions
Post by: Gunslinger on March 28, 2014, 09:40:09 PM
Anybody remember what the dimension is from the top of the windshield to the rear of the body?  Diagonal dimension?  I'm trying to figure out how far rearward my windshield is canted.
Thanks
Title: Re: Body dimensions
Post by: Bob W on March 29, 2014, 07:34:40 AM
The Bestop Tigertop instructions have the dimension that seems to be accurate.

http://www.bestop.com/images/installation_guides/51403.pdf

"Measure and record the distance from the top inside edge of the windshield to the rear inside edge of the vehicle body, not the tailgate. Take the measurement from approximately six inches inside the vehicle�s doors. Check to make sure that both sides measure equally. To install this top properly, this measurement must be 66 1/2 inches"
Title: Re: Body dimensions
Post by: Gunslinger on March 29, 2014, 10:01:38 AM
Thank you sir!