My Willys 3A and 3B Community
3A, 3B, DJ Technical Knowledge Base => "Original"-- Technical Questions, Answers, Observations => Topic started by: 1955CJ-5 on February 28, 2014, 10:12:47 PM
-
Well, this is getting frustrating, and it's a purely useless exercise anyway...what use is a heater if you don't have a top?
But, I've had it out and repaired three times, and each time it works for a short time and starts to leak again.....probably work hardened beyond hope...
Is there a source for replacement cores? It's the roughly 4" by 16" core..
Anyone have any experience with this?
It's bypassed for now....and it may remain that way....
-
Mine were cracking where the two tubes go into the core. I finally got that problem sorted out.
-
That seems to be the area where this one is leaking.....I'll pull it out again and take it back to the shop....
-
I had mine re-cored at a shop. The new core is about an 1/8"-1/4" shorter than the original but it works fine now.