My Willys 3A and 3B Community
3A, 3B, DJ Technical Knowledge Base => "Original"-- Technical Questions, Answers, Observations => Topic started by: Gunslinger on February 16, 2014, 05:23:39 PM
-
I don't use my jeep much in the winter so it sits for a long time between uses.� Last time I drove it was New Year, I usually keep it on a trickle charger but I get tired of tripping over cords on the garage floor, so I added this 1.5 amp on board charger today.
(http://i1089.photobucket.com/albums/i356/banjo19/DSC01056_zpse416ebdf.jpg) (http://s1089.photobucket.com/user/banjo19/media/DSC01056_zpse416ebdf.jpg.html)
It's bolted to the fender just below my fuse block.� This should clean things up a bit.
Here's a picture of the timing mark device that bolts on the front cover, I measured it to be 1/2 inch above the pulley, its from an M38.� Sorry for the poor picture, its pretty crowded down there.
(http://i1089.photobucket.com/albums/i356/banjo19/DSC01059_zps0f6014e2.jpg) (http://s1089.photobucket.com/user/banjo19/media/DSC01059_zps0f6014e2.jpg.html)
Its the only thing in focus on this shot.