My Willys 3A and 3B Community

3A, 3B, DJ Technical Knowledge Base => "Original"-- Technical Questions, Answers, Observations => Topic started by: gmcjr on January 25, 2014, 12:06:43 AM

Title: Valve retainer oops!
Post by: gmcjr on January 25, 2014, 12:06:43 AM
After just doing what ended up being a in frame rebuild, my little willys ran great, but then it devolved a BAD tappet knock. With the engine idling, I noticed if I put sideways pressure on the noisy valve, it became quieter. On a hunch, the valve retainer was swapped with one from my parts engine. Problem solved. This is what the old one looked like.

(http://i1343.photobucket.com/albums/o794/gmcjr1982/Mobile%20Uploads/IMG_0193_zps475b6143.jpg) (http://s1343.photobucket.com/user/gmcjr1982/media/Mobile%20Uploads/IMG_0193_zps475b6143.jpg.html)

The valve retainers are uneven, I'm guessing that was causing the spring to rock back and forth just enough to pop. Any thoughts?
Title: Re: Valve retainer oops!
Post by: F Bill on January 25, 2014, 09:00:13 AM
Looks like someone swapped in a retainer half that didn't match the other one..Probably after they dropped one while doing a valve job and couldn't find it...Good sleuthing to find that one!
Title: Re: Valve retainer oops!
Post by: Carls_jeep on January 26, 2014, 05:59:09 PM
could be wear on one or more of the parts.
Title: Re: Valve retainer oops!
Post by: gmcjr on January 26, 2014, 09:06:59 PM
Quote
could be wear on one or more of the parts.

There was some wear, I think some dufus (me) mismatched some parts!

Quote
Looks like someone swapped in a retainer half that didn't match the other one..Probably after they dropped one while doing a valve job and couldn't find it...Good sleuthing to find that one!

It proves just because they are the same part, doesn't mean they are the same, another lesson learned....... Thanks for y'all's input!