My Willys 3A and 3B Community

3A, 3B, DJ Technical Knowledge Base => "Original"-- Technical Questions, Answers, Observations => Topic started by: athawk11 on January 08, 2014, 09:18:58 PM

Title: CJ5 Clutch In My 3A
Post by: athawk11 on January 08, 2014, 09:18:58 PM
I was a little surprised to find that I have a CJ5 clutch assembly attached to my L134 -3A engine.� The clutch disc is 9 1/4". The flywheel has a 129 tooth ring gear.� The starter has a 9 tooth Bendix.� �The ring gear, clutch disc and Bendix look near new, and the set up functions fine.

Question...Is there any advantage, or disadvantage to this set up?


(http://i1195.photobucket.com/albums/aa397/athawk11/athawk11%20Willys%20White/image_zpsf2ec9fd6.jpg)

(http://i1195.photobucket.com/albums/aa397/athawk11/athawk11%20Willys%20White/image_zpsd67b3f9d.jpg)


Title: Re: CJ5 Clutch In My 3A
Post by: 1955CJ-5 on January 08, 2014, 09:36:49 PM
I think the 9 1/4" clutch is the heavy duty disc.....most CJ-5 f-heads used the 8 1/2 disc like the L-heads...

Title: Re: CJ5 Clutch In My 3A
Post by: Ryan_M on January 08, 2014, 09:43:19 PM
I've heard the heavy duty clutches can be a bear on the left leg as the pedal pushes a lot harder but I don't know for sure. You plan on doing any heavy duty rock crawling or county fair tractor pulls?
Title: Re: CJ5 Clutch In My 3A
Post by: Mike S on January 08, 2014, 09:51:24 PM
The 9.25" HD clutch was an optional upgrade and can be retro-fitted to the standard 134 flywheel. You will have to drill and tap the flywheel, and I would rebalance it. It may require a slightly different clutch shaft. I seriously considered this upgrade for my 2A, but ended up putting a standard clutch in.

The HD clutch will withstand higher torque and wear and tear.
Title: Re: CJ5 Clutch In My 3A
Post by: ZekeD on January 09, 2014, 11:52:22 PM
Advantage:  it is there and it works :D