My Willys 3A and 3B Community

3A, 3B, DJ Technical Knowledge Base => "Original"-- Technical Questions, Answers, Observations => Topic started by: ZekeD on November 10, 2013, 08:21:00 PM

Title: Tech guide needed
Post by: ZekeD on November 10, 2013, 08:21:00 PM
Is there a tech guide that gives all of the tolerances and torque settings for the CJ?   My old (67) Porsche had a guide that conveniently listed how hard to turn things...    My uncle Jack said "Stop 1/4 turn before it breaks".    RIP Jack :)

Zeke
Title: Re: Tech guide needed
Post by: Ryan_M on November 10, 2013, 08:24:32 PM
Does this help?

http://www.cj-2a.com/techtips/specs/torques.html
Title: Re: Tech guide needed
Post by: p3ferris on November 10, 2013, 09:46:21 PM
Also helps with rebuild but not any torques
http://www.cj3apage.com/index/Tech_Tips.htm
Title: Re: Tech guide needed
Post by: SteveW on November 10, 2013, 10:31:36 PM
The universal service manual has all the torque spec's in the miscellaneous data section both engine and chassis
Title: Re: Tech guide needed
Post by: PaulS on November 12, 2013, 09:42:51 AM
As Steve said, the service manual has them.  Moses Ludel's rebuilder's manual has them as well.

-Paul
Title: Re: Tech guide needed
Post by: ZekeD on November 12, 2013, 11:01:23 AM
Thanks guys!  I'm on a book quest now. 

Zeke