My Willys 3A and 3B Community

3A, 3B, DJ Technical Knowledge Base => "Original"-- Technical Questions, Answers, Observations => Topic started by: Steve on October 11, 2013, 12:14:29 AM

Title: Headlight Trim Ring (Bezel) Removal
Post by: Steve on October 11, 2013, 12:14:29 AM
Tonight I started the process of disassembly. Right off the bat I was stumped by how to remove the headlight trim rings from the grill. So, could someone please clue me in on how to get the trim rings off? Thanks.

Steve
Title: Re: Headlight Trim Ring (Bezel) Removal
Post by: Bob W on October 11, 2013, 05:51:53 AM
Remove the one screw at the bottom then pull the ring out at the bottom and lift it up to release the top.
Title: Re: Headlight Trim Ring (Bezel) Removal
Post by: 1955CJ-5 on October 11, 2013, 01:46:09 PM
Mine were really stuck after years of paint, grime etc etc. Massage them gently this way and that and eventually they should pop loose just as Bob said.

I think they are chromed brass so be gentle...
Title: Re: Headlight Trim Ring (Bezel) Removal
Post by: Steve on October 11, 2013, 04:34:17 PM
Thanks guys. I appreciate you willingness to help out with little questions like this one.  In the past, I would blindly forge ahead and end up trashing something. I am going try and be patient and ask when the potential for destruction is high.

Steve
Title: Re: Headlight Trim Ring (Bezel) Removal
Post by: 1955CJ-5 on October 11, 2013, 05:05:17 PM
We are here...

We have been there...

We have destroyed things unnecessarily...
Title: Re: Headlight Trim Ring (Bezel) Removal
Post by: Gunslinger on October 19, 2013, 10:58:00 AM
I think about 20 percent of my resto was my own fault....