My Willys 3A and 3B Community
3A, 3B, DJ Technical Knowledge Base => "Original"-- Technical Questions, Answers, Observations => Topic started by: 1955CJ-5 on October 07, 2013, 05:00:10 PM
-
Does anyone have a modern paint number for the PPG-30604 "Potomac Gray"??
We tried a Spectramaster code that was provided by RyanM but thought it was a little too yellow....
Thanks!
Randy.
-
So I just finally went to the paint store and compared current PPG chips to the 51 Willys Potomac Gray and picked a gray that I like.....took a pint to the painter and he will try it and see what we get... ....
-
Go for it! Hope it is exactly what you need. If so, please post the info, as I too want a grey navy jeep.
Zeke
-
I recently remembered I have an original fender out in the shed. During my rebuild, it was deemed too rough to repair so I replaced it with a donor fender and promptly forgot about it.
A few days ago I scraped back the top layer of paint to expose some original Potomac Gray. I tried matching it up to my Jeep now and it's tough to tell how close it is. The new color does seems more yellow in some lighting conditions and dead-on in others. The clearcoat on the new paint job is deceiving as the old paint is more flat.
I wish I had been more involved with my paint guy to test colors etc but I pretty much trusted him to get it right (one of many mistakes I made in that arena...).
Not sure if my original colored fender will help you at all. I don't know if I could take it to a paint store, have them try to color match, and send you the paint code or maybe even scrape some of the paint off and send to you?
I'm still kind of curious myself as some day I would like to eventually get the right color if I don't have it already. Let me know if I can help if you haven't committed to a something already.
-
Thanks Ryan, I really appreciate you offer....
I think the only way to get a really good match would be with an example of the original paint, and someone with an excellent eye for color who is willing to take the time to mix and remix until the color matches. I did that once with a local paint shop and it took them all day and it was expensive, and it still wasn't perfect, but it was close.
Even the folks at the paint store refer to their color match camera (a Prophet II) as a hit or miss, and lately they say it's been missing more than hitting....
But I think I've found what I am going to use. PPG urethane, easily duplicated, and flattened to a satin finish.....
But we'll see how it sprays out tomorrow...
And for what it's worth, I restored a 59 MG and trusted the painter to match "Old English White"..well, he got pretty close and it looks very good...but, I too wish I had been more involved....
-
Here's a link to a Willys paint chart on Ebay. I bought one for my 54 3B and had Nasson match the color. It blended in very well with the original paint still on the firewall. I never did get my dang paint chart back though.
http://www.ebay.com/itm/1946-1947-1948-1949-1950-1951-WILLYS-JEEP-CJ-2A-3A-TRUCKS-PAINT-CHIPS-DITZLER-/271284684189?pt=Motors_Manuals_Literature&hash=item3f29d3c59d&vxp=mtr
-
Thanks Matto...the paint store has the chips, it's just that the mix codes are no longer valid..they could do a custom mix and match the chip, but each gallon would have to be matched separately and they may not match each other....I'll go in the morning and see what the options are....
-
When they mix the paint for you, ask them to write the "recipe" on the side of the can. Any good shop should be willing to list the individual colors and volume of each that make up the mix. That way, you would have the list for future use.
Even better, though more expensive, is to buy all your paint at the same time....at least your basecoat. If you are planning on painting the entire jeep (inside, outside and underneath everything) I would get at least two gallons of basecoat. It will all be mixed at the same time so everything will match and you will have plenty left over for either touchups or a partial repaint if you get into a fender bender later. Be careful and seal the can well, store it in a dry place where it won't freeze and you can keep the extra for quite some time.
To find a good paint supplier, go to several good, privately owned body shops or hot rod shops and see who they use. They should be able to point you in the right direction.
-
Thanks Mark,
I went to the paint store again this morning...looked at lots of chips, and found a Ford gray from 1972...a special order color...that matches the Potomac gray chip almost exactly.
We discussed quantity, and two gallons is the number everyone recommends, so thanks for the verification!
And it's funny that you should mention the formula....it's not on the sample can but I'll be sure to ask about it next time...
He wants to paint tomorrow, the tub is prepped, taped and ready so I need to make a decision!!
Randy
-
good on you! we all are rooting for you on this one.
Zd
-
Well, now that I've seen a close match to Potomac Gray, I'm not sure if I like it!!
The two Potomac gray mixes in the upper right and left. The bottom is the PPG Light gray.....
Woe is me....
-
That was the hardest decision I have made on my jeep was the paint color. I was set on Pickett Gray and did all the research I could on getting it right but just didn't want it to be that color when it came right down to it. What color I wanted was a very hard choice and I usually don't have that problem. I finally made my pick and it is done. Not an original color but it's my jeep and that is the end of it.
-
That was the hardest decision I have made on my jeep was the paint color. I was set on Pickett Gray and did all the research I could on getting it right but just didn't want it to be that color when it came right down to it. What color I wanted was a very hard choice and I usually don't have that problem. I finally made my pick and it is done. Not an original color but it's my jeep and that is the end of it.
I'm thinking that this will turn out the same way.....
It was Luzon Red from the factory....the only thing for sure is that I don't want red.....
-
Now you have me wondering which gray my 47 is.. I am a fan of gray but I have to admit sometimes I wonder why.
Once in a while I think "that looks like a buffed out primer job". Other times, I think grey is a classy color.
-
Maybe that is why the Potomac gray really isn't all that gray, at least the samples I have don't seem that gray. The potomac seems to have a lot of greens and yellows. If I lay the card against a white background, it looks like a light gray, if I put it next to the darker ppg gray card, it looks a little green-gray.
It might look really nice on the jeep....
But once it's there , it's there for good...
-
I know 1955CJ-5 has seen this but I figured I'd include the pic here too in case anyone uses this for reference at some point. It's a comparison of the gray I used on my 3A painted next to an area of original Potomac Gray. My new paint code is what 1955CJ-5 used for the sample in the top right of his pic. Mine is close but not quite right.
-
That looks pretty darn close to me--the biggest difference seems to me to be the dirt/rust on the original side.
-Paul
-
It's amazing how different this paint looks in different light and at different angles.
I finally chose the color on the left side of the pictures. We sprayed some out and after it cured overnight I thought it looked fine. It's a gray with a tinge of green and maybe a little yellow.
The color is from a 1972 Ford optional color chart. It's Ford Gray, # WT2180...PPG mix # 32678 I used the Omni brand by PPG..it's a little less money...
Both pictures are of the same two cards in different light....Ryan's mix is on the right, and mine is on the left...I'd love to see these two jeeps side by side someday....!!
You really can't tell them apart in the first photo....I guess that's why choosing a color is so difficult...
And now I like Potomac Gray...again!
-
I like your choice. It's more what I pictured Potomac Gray would be. I guess next time I'll restore a '72 Ford instead......
-
I have the folks at the paint store to thank for finding this...I guess you could say there are an infinite number of colors, and nearly that many different paint chips...
I bet our jeeps will look identical unless they are side by side and nearly touching.....if you hold these paint cards a foot apart you can't tell one from the other.....
Your jeep was/is my inspiration!
-
It can be difficult as mine looks gray sometimes and almost a white sometimes depending on light and camera. if you like it then paint it.
-
Here is my '49' I believe this is Potomac Gray Pretty good shape since it was under the dash plate, there is a very pristine patch on the fender, under the horn mount, but I don't have a photo.� The digital color is not exactly correct but fairly close, mine seems bluer than the samples above.�
-
Thanks for the picture...It does seem a little blue...a good color though, I like it...
Mine was painted yesterday so it's all over but the shouting now...
-
Yeeeeesssss!!!!!!!!
Taking off the masking tape and paper on a freshly painted jeep is almost as good as unzipping a women's dress!
I can't wait to see photos of the new Willys!
-
I'm posting most of the pictures on the Too rusty to save thread...
But here is one... ;)
-
That looks very nice!� Went up to the farm today to get ready to harvest crops and took a few minutes to look at my jeep.� Found a patch of very pristine paint on the underside of the hood.� After polishing it up and taking a really close look I am convinced of two things:� That it is the original paint, and it does not match the Potomac Gray paint chips presented in this thread.� In fact the photo I added is pretty close to what it looks like.� It is way darker and more blue.� I think it is supposed to be PG but it sure does not look like it to me.� Will try to get a good photo tomorrow.� Guess if you are painting a few thousand Jeeps there can be some batch to batch variability in the paint.� BTW I really like the color.
OK think I may have figured it out. I think it is Picket Gray left over from the CJ2A days. Not officially listed as a 1949 color but seems reasonable that they would use leftover paint the following year.
-
Love those gray Willys. I have admired Ryan's from a far. Asked if Rachel would consider gray over her choice of pale yellow. Nope.
I guess I may have to reconsider the color for the 46.
Tim
-
Asked if Rachel would consider gray over her choice of pale yellow.� Nope.
My daughter wants me to paint the Willys purple with lime green flames.� ::)� Not going to happen, she's going to have to settle for (I think) something close to Normandy Blue. (I have suggested to her that I might let her drive it when she starts going to high school--that's three years away--actually four+, since she'd need to get a driver's licence first. Gives me time to finish this project...)
-Paul
-
My daughter wants me to paint the Willys purple with lime green flames.� ::)� Not going to happen, she's going to have to settle for (I think) something close to Normandy Blue.� (I have suggested to her that I might let her drive it when she starts going to high school--that's three years away--actually four+, since she'd need to get a driver's licence first.� Gives me time to finish this project...)
-Paul
That's an awesome color scheme.� I would like to see it...but I wouldn't want to paint it. ;)� I think I have to agree with the Normandy Blue.�
If your daughter learns to drive using your Willys, it will be an experience she will never forget.� When she is a Grandma, and we are all dust, she will still tell the story about how Dad taught her to drive in an old Willys Jeep.� How cool is that? 8-)
Tim�
-
-Paul[/quote]
If your daughter learns to drive using your Willys, it will be an experience she will never forget.� When she is a Grandma, and we are all dust, she will still tell the story about how Dad taught her to drive in an old Willys Jeep.� How cool is that? 8-)
Tim� [/quote]
Wow, that comment really jumped out at me, because when I was 14 (I'm 61 now), I started driving a Jeep around my grandfather's farm. I have never forgotten that. It always had a trailer attached to it too, so not only did I learn how to operate a manual shift, but I also learned how to back up a trailer at the same time. In my wildest dreams I never could have imagined that many many years later that same Jeep would be owned, and restored, by my son. :)
-
Whether it's Normandy blue or purple with line green flames, I'm not going to be painting it myself. That's one of the few parts of this project that I'm going to farm out to a professional.
When I learned to drive, both my parents' cars were stick shift, so that's what I learned on. I hated it at the time, but I'm so glad I had to go through that. Especially my Dad's habit of making me drive to a steep hill with a stop sign at the top. Learned real well how to use a clutch doing that!
Right now, it's harder and harder to get stick shifts. My truck is an automatic. My wife's car has a stick, but it's going to be replaced very soon, and I don't know if a stick shift will be available on its replacement. If it's an auto, my daughter will have to learn to drive on the Willys. And she will not be given a choice in the matter. ;)
-
So here is a thought: You are the Jeep paint guy and you have a few hundred gallons of Picket Gray left over from the last run of 2As, what do you do with it? Why you squirt it on the first run of 3As. Same with Luzon Red or any of the colors. I may be wrong but according to the charts that I have seen there are not supposed to be any Picket Gray CJ3As, but mine is, and so are a couple early 3As on the serial database page. So I am thinking there will be a significant overlap in year to year colors. Does that make sense, or am I all wet here?
-
I think you are right...they continued the bottom mount radiators for a while...probably because they had some left over.
I doubt they threw anything out that could still be bolted to or sprayed on a jeep....
Picket Gray was one of my possible choices..I still like it...