My Willys 3A and 3B Community
3A, 3B, DJ Technical Knowledge Base => "Original"-- Technical Questions, Answers, Observations => Topic started by: 1955CJ-5 on June 21, 2013, 05:17:09 PM
-
If you are lucky enough to have a Governor control, and decide to remove it from your dash, you can:
A. Lay on your back, reach under the dash and remove the 3/4" nut bit by bit...very tedious and frustrating...
or
B. Remove the chrome front piece and easily remove your governor socket from the dash...
I found out there was an easy way, only after about 40 minutes of struggling with my head under the dash....
Isn't that the way it always happens?