My Willys 3A and 3B Community

3A, 3B, DJ Technical Knowledge Base => "Original"-- Technical Questions, Answers, Observations => Topic started by: 1955CJ-5 on March 08, 2013, 11:30:14 PM

Title: What goes here??
Post by: 1955CJ-5 on March 08, 2013, 11:30:14 PM
There was nothing attached here when I took it apart....

(http://i1055.photobucket.com/albums/s519/green55jeep/1951%20CJ-3A/th_P1040613_zps225cd710.jpg) (http://s1055.photobucket.com/albums/s519/green55jeep/1951%20CJ-3A/?action=view&current=P1040613_zps225cd710.jpg)


Anyone know what goes on that bracket??

Randy
Title: Re: What goes here??
Post by: garage gnome on March 09, 2013, 07:18:32 AM
I'll check my '49. It looks to have an original high crown style bolt holding it on. I know my '53 has nothing there.
Title: Re: What goes here??
Post by: Bob W on March 09, 2013, 07:33:52 AM
Are we talking about the Z shaped bracket on the top of the bellhousing? That is for the starter return spring. By 1953 the CJ-3A used a different starter and bellhousing so there is no bracket. A 1949 should have the bracket but it will be L shaped.
Title: Re: What goes here??
Post by: garage gnome on March 09, 2013, 08:48:09 AM
Yep, what Bob said! That's why my 53 did have it. I originally thought it might have been for a clamp for the parking cable or something.
Title: Re: What goes here??
Post by: 1955CJ-5 on March 09, 2013, 10:17:50 AM
Quote
Are we talking about the Z shaped bracket on the top of the bellhousing? That is for the starter return spring. By 1953 the CJ-3A used a different starter and bellhousing so there is no bracket. A 1949 should have the bracket but it will be L shaped.

Excellent! Thanks for that info. This does have the original kick start starter but the foot operated plunger was not all there..I'll need to find a replacement one. Would the plunger/spring/floor bracket from an early pickup work? I've seen them on ebay...

Randy
Title: Re: What goes here??
Post by: 1955CJ-5 on March 09, 2013, 10:28:01 AM
Would this be correct for a 51 3A?

http://www.ebay.com/itm/New-Correct-Willys-Jeep-Starter-Foot-Push-Rod-and-Oak-Block-CJ3A-/190734181779?pt=Vintage_Car_Truck_Parts_Accessories&hash=item2c68a4a593&vxp=mtr

I have the plunger, so wood for the block and the spring should be easy enough to find locally.
Title: Re: What goes here??
Post by: garage gnome on March 09, 2013, 10:36:24 AM
That's what mine looks like
Title: Re: What goes here??
Post by: 1955CJ-5 on March 09, 2013, 10:47:07 AM
Thanks Nate!

Another mystery solved.
Title: Re: What goes here??
Post by: Bob W on March 09, 2013, 12:40:44 PM
Quote
Would this be correct for a 51 3A?

http://www.ebay.com/itm/New-Correct-Willys-Jeep-Starter-Foot-Push-Rod-and-Oak-Block-CJ3A-/190734181779?pt=Vintage_Car_Truck_Parts_Accessories&hash=item2c68a4a593&vxp=mtr

I have the plunger, so wood for the block and the spring should be easy enough to find locally.

The spring is not correct. There were also 2 different versions of the push rod pedal although they are semi-interchangeable.
Title: Re: What goes here??
Post by: 1955CJ-5 on March 09, 2013, 02:37:30 PM
Is it the wrong spring or should there just not be a spring, as there already is a return spring on the starter?
Title: Re: What goes here??
Post by: Bob W on March 09, 2013, 02:41:00 PM
Quote
Is it the wrong spring or should there just not be a spring, as there already is a return spring on the starter?

Correct, there is only one spring and it goes between the clip on the bellhousing and the pedal where it connects to the starter arm.
Title: Re: What goes here??
Post by: 1955CJ-5 on March 09, 2013, 06:23:11 PM
Thanks Bob,

So with the return spring to the bell housing and a small block of hardwood I'll be in business....
Title: Re: What goes here??
Post by: Bob W on March 09, 2013, 08:41:44 PM
Here is more information about the starter block if you are concerned about it being original....
http://www.cj3a.info/tech/sblock.html
Title: Re: What goes here??
Post by: 1955CJ-5 on March 09, 2013, 10:59:37 PM
Thank you again...

Whenever I can I like to make or replace parts so that the jeep will be as original as possible..even those parts that will be seldom or maybe never seen until the next time it's rebuilt...
Title: Re: What goes here??
Post by: macrisel on March 12, 2013, 10:10:51 AM
Bob, do you have a photo of the return spring from the starter to the bellhousing?
Title: Re: What goes here??
Post by: garage gnome on March 12, 2013, 04:32:05 PM
(http://i748.photobucket.com/albums/xx125/willyscjmj/6952D1DB-7B9F-4B2D-B0EB-1EFA59E8D197-2400-00000551371317A6.jpg)
Title: Re: What goes here??
Post by: 1955CJ-5 on March 12, 2013, 06:46:20 PM
Excellent picture Nate!

And that is the e-brake cable next to it on the firewall?

Thanks..

Randy
Title: Re: What goes here??
Post by: garage gnome on March 12, 2013, 06:55:30 PM
That's the speedometer cable. The parking brake is in the lower right corner.
Title: Re: What goes here??
Post by: 1955CJ-5 on March 12, 2013, 09:16:26 PM
OK I see it......my speedometer cable was gone also but the e-brake cable was there....very helpful information as always!

Randy
Title: Re: What goes here??
Post by: Bob W on March 12, 2013, 09:47:09 PM
Thanks for posting the spring photo Nate. Those springs are another one of those high failure rate items that are difficult to find in place.
Title: Re: What goes here??
Post by: garage gnome on March 13, 2013, 10:41:30 AM
You're welcome! Surprisingly this is still the original on here. :knocks on wood:
Title: Re: What goes here??
Post by: macrisel on March 13, 2013, 12:12:38 PM
Nate, how much tension does that spring have?  Mine is missing and I'm trying to decide on a replacement.  Is it about as strong as a carb return spring?

Also, is this spring in addition to the one located inside the cab around the foot starter?
Title: Re: What goes here??
Post by: Bob W on March 13, 2013, 01:45:32 PM
Quote
Nate, how much tension does that spring have? �Mine is missing and I'm trying to decide on a replacement. �Is it about as strong as a carb return spring?

Also, is this spring in addition to the one located inside the cab around the foot starter?

It's probably a little bit stronger than a carburetor return spring. The spring's wire diameter is 0.067" with a spring rate of 11.8 lbs per inch.

Originally there was only one spring as seen in Nate's photo, none inside the cab.
Title: Re: What goes here??
Post by: macrisel on March 14, 2013, 10:02:12 AM
Bob, when did that change take place and what would be considered "original" for a 1951?  Is one method better than the other?
Title: Re: What goes here??
Post by: Bob W on March 14, 2013, 11:09:50 AM
Quote
Bob, when did that change take place and what would be considered "original" for a 1951? �Is one method better than the other?

Which change are you asking about?

In 1951 the starter would have be an MZ 4162, starter rod 801171 (this is slightly longer but not as tall as previous design), spring clip 800244 (Z shape), and spring 646627.
Title: Re: What goes here??
Post by: macrisel on March 18, 2013, 12:36:02 PM
Thanks, that it what I needed!
Title: Re: What goes here??
Post by: F Bill on March 18, 2013, 01:59:11 PM
I am thinking we need pictures of all those parts to redo our starter rod/block page on the main website....I'm beginning to see why you told me what ya did about that page, Bob.

I don't have any of that stuff in my Pintojeep for some strange reason, so if anyone has good pictures of the required parts, post away..  :)