My Willys 3A and 3B Community

3A, 3B, DJ Technical Knowledge Base => "Original"-- Technical Questions, Answers, Observations => Topic started by: Gunslinger on March 16, 2013, 11:35:12 AM

Title: Control lever tube
Post by: Gunslinger on March 16, 2013, 11:35:12 AM
Gents need some council from the Willys Gurus.
I'm looking at page 157 of the jeep universal manual, part number 9 is the Control tube, I need to know how much side to side movement is acceptable in a properly installed control tube.  Mine has a bit over an inch of side to side, I think that is too much but I can't find any shims that might be missing.

I'm in the process of ripping down the brake and clutch pedal assemblies as my brake pedal has too much slop, so now is the time to fix the rest of the linkage.

Thanks
Gunslinger
Title: Re: Control lever tube
Post by: Gunslinger on March 16, 2013, 04:20:04 PM
No worries gents, figured it out, the spring that goes inside the tube is MIA, that is where the slop is coming from.