My Willys 3A and 3B Community

3A, 3B, DJ Technical Knowledge Base => "Original"-- Technical Questions, Answers, Observations => Topic started by: BMIC on March 01, 2013, 11:51:08 AM

Title: Oil Pressure Part
Post by: BMIC on March 01, 2013, 11:51:08 AM

Little help please.... Does anyone know the size of the brass elbow fitting that attaches the oil pressure line to the block? Napa part #?
Thanks

Title: Re: Oil Pressure Part
Post by: athawk11 on March 01, 2013, 12:18:22 PM

BMIC,

I believe the Napa # is 402X4. �If it's not that one, it's probably # 402X3

Grab one of their 1/4" brake lines and bring it to the counter with you. �If the brake line fits in the compression side of the elbow, this will be the right part to fit in the block.

Edit...And I believe either will work.  Just the wrench size on the elbow might be different.

Title: Re: Oil Pressure Part
Post by: BMIC on March 01, 2013, 01:58:54 PM

Thanks Tim, HUGE help.... there is always one small piece you forget to order that holds up a smooth weekend.

Title: Re: Oil Pressure Part
Post by: garage gnome on March 01, 2013, 02:36:24 PM

Should be 1/8" NPT to 1/4" tubing.