My Willys 3A and 3B Community

3A, 3B, DJ Technical Knowledge Base => "Original"-- Technical Questions, Answers, Observations => Topic started by: athawk11 on May 09, 2012, 04:48:28 PM

Title: It's a Little Quiet Here.
Post by: athawk11 on May 09, 2012, 04:48:28 PM
I don't know if we can liven up the board, or not. �I'm sure many of you have your hands full with your Willys as summer approaches. �Maybe your Willys is just sitting comfortably waiting for its chance to fly. �

Aside from Carl and his frustrating discovery, perhaps we can all post what we are doing, or have recently done with our Willys. �Maybe with a few photos. �

Just touch base. �Oil change? Painting a part? �Trail ride? �Bought a new pan to catch leaks? �:-? �Carb adjustment? �Anything.

Anything that involves you and your Willys.

I'll start: �Check out the "Gatherings" page. �A few of us went to the Golden Super Cruise last weekend. �(Pictures) �I discovered my Willys leaks through the front of the transmission. �I am trying to decide whether to tear it open or wait till winter.

Tim
(http://i1195.photobucket.com/albums/aa397/athawk11/20120506002.jpg)


Title: Re: It's a Little Quiet Here.
Post by: F Bill on May 09, 2012, 05:27:15 PM
I've been climbing over, around and next to my 3A constantly, as I try to find the tools in the shop. I remodeled one of my brother's rentals and took care of improvements to the official Willys Six Acre Campground, thanks to a local arsonist..This was two pretty rough houses, now it will be camper spaces.
(http://inlinethumb61.webshots.com/49596/2385470010037238516S500x500Q85.jpg) (http://home-and-garden.webshots.com/photo/2385470010037238516UPFLuX)

Got all the tin picked up, raked up and used a magnet on a bunch of nails, and brought almost $400 in scrap to the local salvage yard. The site is just across the street from the show and shine area and the hillclimb obstacle, and down the road from the official Willys Six Acres Salvage yard. More of the story is over on the 2A page.

And in between, I have been visiting the dentist, losing teeth in preparation for dentures, and working on the road. Poor Willys hasn't seen me much. But each time I get out of the dentist about all I am good for is hanging out on the jeep boards, so you guys have seen me... �;D....

Oh, and today I dragged home something from Germany.....but don't tell anyone I am a Bug owner again. (A 1970, just like I drove in high school cept this one isn't white. or complete...)


Hopefully every one else is doing a wee �bit more with their jeep than I have.

EDIT:  I forgot.....I also read YEAR OF THE JEEP this week. First time in years...If you haven't read it as a kid you need to read it now, if you are into storyies about abandoned jeeps and teenage hijinks, with a jeep auction being the climactic ending.
Title: Re: It's a Little Quiet Here.
Post by: Jesse on May 09, 2012, 06:15:01 PM
Well I drove the jeep this winter with my friends, put in the heater a couple of months ago and it works great. I have taken another big road trip in Wisconsin and when I got home the clutch linkage snapped. So now I have a new clutch linkage.

This summer we are doing 11 inch disk brakes for the front and going to back to the 50's car show. Gunslinger is coming to, I'm sure he won't be able to stay away.

Other than that its drive drive drive

-Jesse
Title: Re: It's a Little Quiet Here.
Post by: Ryan_M on May 09, 2012, 06:41:00 PM
I'm still sitting around waiting for the bodywork to be completed. The original plan was for it to be done by Christmas 2011. Long story short and two body guys later I'm hoping for the end of this month. In the meantime, I can't do much else but sit and stare at the rolling chassis.

So now would be a perfect time for a game of "WTF is that????". Surprisingly, I haven't had too many left over pieces after my rebuild but I do have this one. Any idea what it is?

(http://i1188.photobucket.com/albums/z403/rmurdock2121/51%20Willys%20Jeep%20CJ3A%20Rehab/DSCN0181.jpg)
Title: Re: It's a Little Quiet Here.
Post by: Uncle_Vin on May 09, 2012, 06:47:21 PM
Quote
I don't know if we can liven up the board, or not. �I'm sure many of you have your hands full with your Willys as summer approaches. �Maybe your Willys is just sitting comfortably waiting for its chance to fly. �

Aside from Carl and his frustrating discovery, perhaps we can all post what we are doing, or have recently done with our Willys. �Maybe with a few photos. �

Just touch base. �Oil change? Painting a part? �Trail ride? �Bought a new pan to catch leaks? �:-? �Carb adjustment? �Anything.

Anything that involves you and your Willys.

I'll start: �Check out the "Gatherings" page. �A few of us went to the Golden Super Cruise last weekend. �(Pictures) �I discovered my Willys leaks through the front of the transmission. �I am trying to decide whether to tear it open or wait till winter.

Tim
(http://i1195.photobucket.com/albums/aa397/athawk11/20120506002.jpg)



Amen
Title: Re: It's a Little Quiet Here.
Post by: Bob W on May 09, 2012, 07:55:22 PM
Quote
Any idea what it is?

I'd say it is part #649270 Bracket, support, radiator to splash apron.

(http://www.cj3a.info/reference/649270.jpg)
Title: Re: It's a Little Quiet Here.
Post by: Ryan_M on May 09, 2012, 08:03:25 PM
Quote
Quote
Any idea what it is?

I'd say it is part #649270 Bracket, support, radiator to splash apron.

(http://www.cj3a.info/reference/649270.jpg)


That's a relief. If you showed me it located inside the transmission I would have probably started crying.
Title: Re: It's a Little Quiet Here.
Post by: Bedrock on May 09, 2012, 09:15:32 PM
If I made a post for every problem I find with my jeep, as I try to get it mechanically decent so that I can start working on the body, this place would be a lot more active.  I would probably be spending half of every day on the computer.  Today I was trying to remove the shackles from the rear springs.  I thought they would go as easy as the front shackles did.  But, no suck luck. I should have known better.  Can't unscrew the upper shackle bolt on one of the springs.  A 2 foot breaker bar won't budge it......yet.  No, it's not a left hand thread.

Going to get real serious with it tomorrow.
Title: Re: It's a Little Quiet Here.
Post by: athawk11 on May 09, 2012, 10:03:06 PM
See, this is what I'm talking about.  Just touching base...making contact.  I know you're all out there.  You may not think you have anything interesting to add, but say it anyway, because I learned something new today.  My Willys doesn't have that bracket.  And now I'm curious as to why.  

Bedrock, I must admit, I was about to post the Left hand thread question...until I saw your last sentence. :D

Bill,  I saw your post about that building over on the 2A page.  Have you decided if it was a curse or a Godsend?
Title: Re: It's a Little Quiet Here.
Post by: F Bill on May 10, 2012, 12:11:29 AM
Definite blessing in disguise, I got $400 for the scrap and while I was at the scrap metal place I found an old battery load tester they sold me for $10...... :D  I think it's inductive pickup for the ammeter is a little off but other than that it has a great   adjustable load and voltmeter.. Came with the stand too, was disposed of by a local military base as they thought it was junk....... ;D
Imagine that, a junk Snapon digital  battery tester. Picked up a nice big four wheel wagon too in case I have hay to haul or want to be in the local parades....

I just hadn't planned on cleaning up those houses this particular week... so someone decided to put them on my schedule anyway. And even tho he did me a favor, the arsonist is gonna get prosecuted if I have anything to say about it.....If the wind was blowing the other direction he would have burned out a house with people sleeping in it.

Back to jeeps!!
Title: Re: It's a Little Quiet Here.
Post by: RandyA on May 10, 2012, 01:40:55 AM
It's only quiet around my neck o the woods because after 37 years of marriage I have been instructed too cry quietly............OH and I finally got the headlights re-wired on Beulah....Yahoo......
Title: Re: It's a Little Quiet Here.
Post by: Bob W on May 10, 2012, 06:40:14 AM
Quote
My Willys doesn't have that bracket. �And now I'm curious as to why.

The bracket was installed with side mounted radiators only (there is no place to put it with bottom mount) and then was eliminated sometime in about mid-late 1951.
Title: Re: It's a Little Quiet Here.
Post by: garage gnome on May 10, 2012, 07:53:51 AM
Thanks Bob, I was wondering the same thing myself. My '53 was pretty original when I got it and it doesn't have that bracket.
Title: Re: It's a Little Quiet Here.
Post by: CJPilot on May 10, 2012, 04:56:55 PM
As usual l I've bitten off more than I should.

(http://i1146.photobucket.com/albums/o537/CJPilot1/Publiccj3a/3awotub.jpg)

I'm working on painting the frame, installing brake lines, �sealing the transfer case, �new engine mounts, etc etc.

Looking for seats.

I'll be picking up a transmission tomorrow. I still need to check the clutch. �

Been spending a lot of time and money at �Walck's web site.




Steve

Title: Re: It's a Little Quiet Here.
Post by: macrisel on May 10, 2012, 05:00:05 PM
I have actually started to disassemble my 51 3A and get it ready to paint..
(http://i785.photobucket.com/albums/yy138/macrisel/Image0176.jpg)

But in the meantime, my buddy/painter bought a paintbooth. �The only problem catch was I had to travel to TN with him, help him disassemble it, haul it back to Missouri and reassemble it in his shop.....which we are still working on.
(http://i785.photobucket.com/albums/yy138/macrisel/IMG_0974.jpg)
After week 2
(http://i785.photobucket.com/albums/yy138/macrisel/IMG_0125.jpg)

It is a nice Devilbiss semi-downdraft booth with an air makup on it. �When it is all said and done, my Willy will be the first thing painted in it! �My 3A has been on hold for about a month while we get this thing together.
Title: Re: It's a Little Quiet Here.
Post by: Comanche_County on May 10, 2012, 05:40:28 PM
Here's my latest Jeep activity.  Been kinda slow lately because I may have perhaps found me a real life flesh and blood girlfriend and if she keeps stealing my Jeep time from me, I'm gonna kick her to the curb....oh who am I kidding, I'll have to manage my time better and squeeze more Jeepin in.  

So here's the latest find.....My Jeep spotting super powers allowed me to once again spot an obscure jeep item mostly hidden in the weeds in the back part of some pasture while whizzing by at 70 mph. �I spotted an old hard top, then close by, an M38! �Its been stripped out and is currently the "War Jeep" for the fellas younger grand sons, complete with a machine gun. �Haven't contacted him yet, he might not want to sell it because its been designated as a play thing for youngins, but I am really lusting over the full floating D44.  I noticed it has different knuckles also.  Where as the steering arms on my CJs are cast into the knuckle, the steering arms on the M38 look to bolt on top with the king pins.  Sorry, kinda crappy pictures.

(http://farm6.staticflickr.com/5194/7173074714_bf0357db10_z.jpg)

(http://farm9.staticflickr.com/8007/7173093068_7e600b5a03_z.jpg)

(http://farm8.staticflickr.com/7234/7173083994_b4f1ac78cf_z.jpg)

(http://farm6.staticflickr.com/5324/7173081088_6b5116c234_z.jpg)

(http://farm8.staticflickr.com/7237/7173078120_ff935ed38e_z.jpg)

(http://farm8.staticflickr.com/7228/7173089558_fa4610a1bb_z.jpg)
Title: Re: It's a Little Quiet Here.
Post by: aboyandhisdog on May 10, 2012, 06:57:12 PM
Are you certain an M38???  I'm thinking an early 2A.  But a good find in any case!
Title: Re: It's a Little Quiet Here.
Post by: athawk11 on May 10, 2012, 08:25:43 PM
That is a full floater!!! � Nice. �I'm with Dog on this one. �Has characteristics of an early, early 2A. �Even though its been picked, the body looks pretty darn good. �I also spotted a dozen parts here and there that I would pull out of her.

I wish I had a paint booth. �Edit: I wish I had space for a paint booth.

I am kinda of laughing.... �CJ, I bet that everyone on this site has had that moment. �Biting more than we can chew.
I know I have. �"A touch up here....a brake job there"...next thing I knew, the Willys was in 100 parts spread all over my garage.

Tim �
Title: Re: It's a Little Quiet Here.
Post by: calvinhunt on May 11, 2012, 12:22:16 AM
Thanks, athawk11, for initiating this thread.  It has been really great to get everyone's responses and pics.  
Title: Re: It's a Little Quiet Here.
Post by: 3aJeeper on May 11, 2012, 09:24:53 AM
I've been (trying to) work on the rear and move forward. The frame requires lots of wire brushing and such to remove dirt/clay/rust and repainting that to get it looking better. It's never been my intention to make this a 'show-car' so just focusing on cleaning it up and repairing to the point I can fumble around the 'burbs.

Changed out the fluid in the differential..everything inside looked good. As I mentioned in another thread, I've been cleaning the grease from the entire break assembly - drums, plate, etc - and replacing shoes, cylinders, etc. Next is to start taking the suspension apart and clean those parts up.

(http://i1200.photobucket.com/albums/bb336/carneyjb/CJ3arearendwork.jpg)


Cleaning things up includes getting the brake adjusters to actually turn which is kinda handy. So lots of brake cleaner, a soak thru the electro-rust-removinator, a little paint and they're looking good!

(http://i1200.photobucket.com/albums/bb336/carneyjb/CJ3arestorehubs.jpg)

Still working on cutting away the add-on bumper. Had to cut part of the support beams that connect to the hitch plate. Too rusted and welded together to save. You can see the extra bumper in this photo too. I've cut away most of it...still a little to go.

(http://i1200.photobucket.com/albums/bb336/carneyjb/Cj3aRear_marked.jpg)
Title: Re: It's a Little Quiet Here.
Post by: Bedrock on May 11, 2012, 10:48:59 AM
Finally got the upper right rear shackle bolt out.  Pardon my misuse of the proper terms.  I hope this description is understandable.

To say that the shackle bolt was tight is an understatement.  The first thing that gave way were the welds that held the shackle bolt "body" into the hanger.  After that I had to use a small monkey wrench on the shackle body to hold it will I tried to loosen the bolt.  Then I broke my 12 point 7/8" socket.  I went to a 6-point socket, with a 2 foot breaker bar, and turned the corners off the bolt head.  Then had nothing to lose, so I put a 3 foot pipe wrench on it, and turned half the head off.  By then I was figuring that I would end up cutting the hanger off, and putting a new one on, a job I was not looking forward to. But I was not ready to give up.  I took a 2 pound sledge hammer and beat the hanger open so that I could get the shackle body out.   After I got it out, I put was was left of the bolt head in my vise, heated the body with my little propane torch, put the big monkey wrench on it, and broke the rest of the bolt head off.  You could now look right thru the body where the shackle screws in, and I figured I was done.  I got my cutting wheel ready to cut the hanger off, but had one more option.  I called my welding expert, and took what I had left over to him to see what he could do.  He was making no guarantees.  He took a 5" bolt that fit snuggly inside where the shackle screws in, and gas welded it to what was left of the bolt head, and to the other end that protrudes.  He put it in a huge vise, turned on the welded bolt, and BROKE THE WELDS trying to unscrew the stuck bolt.   Then he arc welded the bolt back on, and broke THOSE welds.  I had never seen anything like this.  He said there was one more thing to try.  He re-arc welded the bolt in, and heated the body until it was tangerine orange, turned on the bolt he had welded in, and finally the shackle bolt came out.  Unbelieveable.

I took the part back home, put it back in the hanger, bent the hanger back into shape, welded the part in with my little Hobart welder.  And, easy peasy Japanesee, I was done!  Only took me 6 hours, over the course of 2 days to remove one shackle bolt.  Happily both shackle bolts came loose easily on the other rear spring.
Title: Re: It's a Little Quiet Here.
Post by: Comanche_County on May 11, 2012, 03:13:31 PM
Quote
Are you certain an M38??? �I'm thinking an early 2A. �But a good find in any case!

Well I didn't run the serial number but I thought it was an M38 with the wrong windshield because of the gas tank drop section, glove box, and two storage box indentations on the back of both rear fender wells, plus it wasn't a D41, maybe a 23-2? �It also didn't have the large M38 data plates, and I thought the tool indents were on the passenger side on an M38, it had the tool indentations on the drivers side, heck IDK, ya'll know more than I on these.

(http://farm8.staticflickr.com/7220/7173086904_ae4a350aa7_z.jpg)
Title: Re: It's a Little Quiet Here.
Post by: Comanche_County on May 11, 2012, 03:15:59 PM
Quote
Finally got the upper right rear shackle bolt out. �Pardon my misuse of the proper terms. �I hope this description is understandable.

To say that the shackle bolt was tight is an understatement. �The first thing that gave way were the welds that held the shackle bolt "body" into the hanger. �After that I had to use a small monkey wrench on the shackle body to hold it will I tried to loosen the bolt. �Then I broke my 12 point 7/8" socket. �I went to a 6-point socket, with a 2 foot breaker bar, and turned the corners off the bolt head. �Then had nothing to lose, so I put a 3 foot pipe wrench on it, and turned half the head off. �By then I was figuring that I would end up cutting the hanger off, and putting a new one on, a job I was not looking forward to. But I was not ready to give up. �I took a 2 pound sledge hammer and beat the hanger open so that I could get the shackle body out. � After I got it out, I put was was left of the bolt head in my vise, heated the body with my little propane torch, put the big monkey wrench on it, and broke the rest of the bolt head off. �You could now look right thru the body where the shackle screws in, and I figured I was done. �I got my cutting wheel ready to cut the hanger off, but had one more option. �I called my welding expert, and took what I had left over to him to see what he could do. �He was making no guarantees. �He took a 5" bolt that fit snuggly inside where the shackle screws in, and gas welded it to what was left of the bolt head, and to the other end that protrudes. �He put it in a huge vise, turned on the welded bolt, and BROKE THE WELDS trying to unscrew the stuck bolt. � Then he arc welded the bolt back on, and broke THOSE welds. �I had never seen anything like this. �He said there was one more thing to try. �He re-arc welded the bolt in, and heated the body until it was tangerine orange, turned on the bolt he had welded in, and finally the shackle bolt came out. �Unbelieveable.

I took the part back home, put it back in the hanger, bent the hanger back into shape, welded the part in with my little Hobart welder. �And, easy peasy Japanesee, I was done! �Only took me 6 hours, over the course of 2 days to remove one shackle bolt. �Happily both shackle bolts came loose easily on the other rear spring.


I had the same issue, broke the shackle bolt heads off.  So I just cut the spring hangers off and ordered new hangers and bolts.
Title: Re: It's a Little Quiet Here.
Post by: F Bill on May 11, 2012, 06:43:52 PM
Quote
Here's my latest Jeep activity. �Been kinda slow lately because I may have perhaps found me a real life flesh and blood girlfriend and if she keeps stealing my Jeep time from me, I'm gonna kick her to the curb....oh who am I kidding, I'll have to manage my time better and squeeze more Jeepin in. �

So here's the latest find.....My Jeep spotting super powers allowed me to once again spot an obscure jeep item mostly hidden in the weeds in the back part of some pasture while whizzing by at 70 mph. �I spotted an old hard top, then close by, an M38! �Its been stripped out and is currently the "War Jeep" for the fellas younger grand sons, complete with a machine gun. �Haven't contacted him yet, he might not want to sell it because its been designated as a play thing for youngins, but I am really lusting over the full floating D44. �I noticed it has different knuckles also. �Where as the steering arms on my CJs are cast into the knuckle, the steering arms on the M38 look to bolt on top with the king pins. �Sorry, kinda crappy pictures.

(http://farm6.staticflickr.com/5194/7173074714_bf0357db10_z.jpg)

(http://farm9.staticflickr.com/8007/7173093068_7e600b5a03_z.jpg)

(http://farm8.staticflickr.com/7234/7173083994_b4f1ac78cf_z.jpg)

(http://farm6.staticflickr.com/5324/7173081088_6b5116c234_z.jpg)

(http://farm8.staticflickr.com/7237/7173078120_ff935ed38e_z.jpg)

(http://farm8.staticflickr.com/7228/7173089558_fa4610a1bb_z.jpg)


Wait just a darn second here, Jay.... Try calling it a WWII jeep with a 2A windshield!   You found the holy grail!!


Check it out, A WWII jeep has....Full floater rear end, drivers side tool indents, glove box shaped just like your pictures, headlight hold down brackets on the fenders, etc...... I even saw the machine gun mount under the tub in your rear axle picture. Even the sought after radiator air deflector on the hood.

On the glovebox door, which is missing (see if the owner put it away for safekeeping) were the original government data plates with serial numbere and date of manufacture.. However.....you can get a good idea from its features if you keep digging.  If it is a Ford made GPW , the front crossmember under the radiator will be an upside down U with a BIG F visible thru the grille.  If it is a MB, it will have the same front crossmember as your 3A and 2A have...    GPW ID number is stamped into the frame by the drivers motor mount. MB is on a small tag on the left front frame horn.

THe WWII front axle is identified by having a bellcrank bracket on the axle itself, instead of on the crossmember like later jeeps.    It also has those steering arms you noted.

If it was early 2A, there would be an oval hole for the column shift in the floorboard around the steering column.  What grille is in the jeep?
Title: Re: It's a Little Quiet Here.
Post by: Comanche_County on May 11, 2012, 06:59:39 PM
Jeez Bill, in preparation to move to GA, I just sold the 50', an enclosed trailer, one of my MJs, got a buyer coming here Sunday to buy my 20' car hauler, and even sold a few guns,,,,,now you're tempting me to reallocate my cash and get another jeep! �I'll go take some better pics and check those numbers you listed. � I did speak with the owner's wife and she said he's a Jeep nut who restores WWII jeeps. �He had a TJ, a YJ, and an old 50's CJ5 in the yard too. �Since he wasn't there, I was kinda in a hurry and I snapped the pics in haste and didn't really get a good look.  I think it was missing the grille.

If that's a WWII jeep then that rear axle should be a 23-2 huh? �It has flat sides, that's why I thought it was a 44 and thus an M38. �I'll take one of my extra 44 covers and compare it, I believe the 23-2 and the 25 share the same diff cover? �

Funny thing is, he lives only a few miles from me,,,,I'm embarrassed I didn't find it sooner, thought I'd already cleared out all the local flatties.
Title: Re: It's a Little Quiet Here.
Post by: Gunslinger on May 11, 2012, 09:58:00 PM
Wow!! Cool thread.
I'm kind of waitning for my new Duster to show up, Jpet on the 2A said he'd have it done soon.  Too cold so far to get too excited but we did go to the local Back to the 50s night at the drive in last week.  Ran into a guy that has a CJ6 with history, it was an ambulance in vietnam and he has the full ambulance top, but when it came home it was given to the Civilain Air Patrol so its sporting that paint now on everything but the hard top.  Going to work on that guy, he said someone is going to have to rescue that jeep from him and I know just the guy to do it. ;D ;D ;D

This week I'm out in the Blackhills, Deadwood to be exact, the sweety and I are looking for a recreational home here in the hills, requirement is that it has to be close to trails for the jeep!  This is a lot harder than I thought it would be, this is our 4th trip out here and we are finally getting close!

Ryan, thanks for that post, I've got those same two brackets, I couldn't remember where they went when I was putting thigns back together, asked a jeep "expert" he said they were never on a jeep.... now I now where they go !!!

We found three jeeps today in our travels one, is an M38A1 with a Koenig winter top, no dice on the sale, the other place had a CJ5 and an M38 with a winter top, looks like they have been at rest for a while, I'm going to try and get back there Saturday.

I do want that paint booth...

Talk to ya later, keep smilin!! ;)
Title: Re: It's a Little Quiet Here.
Post by: Comanche_County on May 12, 2012, 11:46:09 AM
Yup, Ford GPW, nothing gets by you Bill. :) �I took some more pics. �The tub and fenders are in pretty decent shape. �Here's some shots of the steering, the cross member and I found a couple of "F" scripts on it. �No ID tags to be found anywhere. �

(http://farm8.staticflickr.com/7082/7182331266_1788bd7db0_z.jpg)

(http://farm8.staticflickr.com/7072/7182334028_5c9510ddb7_z.jpg)

(http://farm6.staticflickr.com/5453/7182337410_b1d49702ae_z.jpg)

(http://farm9.staticflickr.com/8018/7182345936_056712d433_z.jpg)

(http://farm6.staticflickr.com/5460/7182351974_1e7f65cd04_z.jpg)

(http://farm9.staticflickr.com/8150/7182354884_ed7c49d889_z.jpg)

(http://farm8.staticflickr.com/7222/7182361860_6cd74e9333_z.jpg)

(http://farm8.staticflickr.com/7081/7182364500_2583e047f9_z.jpg)

(http://farm8.staticflickr.com/7097/7182358512_3fbd4daa37_z.jpg)
Title: Re: It's a Little Quiet Here.
Post by: aboyandhisdog on May 12, 2012, 11:55:14 AM
Pretty sweet find, CC...is this going to be your next project?  

You playing a Titleist 1?  Pretty tough lie but you should be able to chip out if you move your radio first.
Title: Re: It's a Little Quiet Here.
Post by: Comanche_County on May 12, 2012, 01:48:16 PM
Haha, no me on the golf course would be like watching Butterbean on dancing with the stars, just something no one should see.  Even though I love the big man. :D
Title: Re: It's a Little Quiet Here.
Post by: F Bill on May 12, 2012, 08:57:06 PM
Yup, that's a gpw allright.. Check the top surface of the drivers side frame rail between the shock mount and the steering gear, and you should find a number, like GPWxxxxx , might have stars before and after...That will tell you when it was built if you check out the serial lists on the net..

Didn't realize a move was on for ya.. Hopefully we get to meet in person before you move away!
Title: Re: It's a Little Quiet Here.
Post by: Comanche_County on May 12, 2012, 10:09:21 PM
Quote
Blackhills, Deadwood

Deadwood is one of my bucket list destinations!
Title: Re: It's a Little Quiet Here.
Post by: Gunslinger on May 13, 2012, 08:50:52 PM
Its a pretty cool place, Deadwood itself is a little on the Touristy side, but man are there jeep trails all over the place.  My personal WMD is the No. 10 Saloon, just can't seem to get enough of it, thats where the locals hang out in the off season... now there's a team to go deep with...?  

So CC, your movin east, seems like you got somthin on your mind and it ain't jeepin!! ;D ;D

Here's to hopin it works out http://www.youtube.com/watch?v=lKg4g9zMeHI&feature=related

Todd
Title: Re: It's a Little Quiet Here.
Post by: macrisel on May 15, 2012, 03:30:22 PM
A quick update on the booth construction:
(http://i785.photobucket.com/albums/yy138/macrisel/427792_378604298858091_100001255729494_1102351_1778390575_n.jpg)

We have finished putting all the panels back together. �There is still quite a bit to do, but this was the biggest challenge! �8-)
Title: Re: It's a Little Quiet Here.
Post by: F Bill on May 15, 2012, 07:30:19 PM
Love that spray booth, it will make painting a joy instead of a chore, especially if he has lights to fill all those holes in the walls.  Looks like it is pretty clean, too.. We had a brand new one at the school I taught at, but the maintenance department thought nothing of parking their salt covered snow plows in my shop every time it snowed, so it got rusty fast. But we could paint a car and no fumes whatsoever in the shop wing. (They would travel to open upstairs classrooms, I heard...oops.) I can't imagine having to pay the heat bill when it was running tho. I bet it has been scrapped by now, if the way things went there kept on going that way. But don't get me started.  :-[
Title: Re: It's a Little Quiet Here.
Post by: athawk11 on May 15, 2012, 10:22:59 PM
Put my leaks on hold for a while. �I bought an old MB rear seat from AZJeeper at the 2A page. �It has been modified to fit a 3A, which in hind site is great. �New cushions are on their way from Beachwood Canvas. �I just started to clean it up.

Tim
(http://i1195.photobucket.com/albums/aa397/athawk11/WillysRearSeat036.jpg)

(http://i1195.photobucket.com/albums/aa397/athawk11/WillysRearSeat039.jpg)

(http://i1195.photobucket.com/albums/aa397/athawk11/WillysRearSeat038.jpg)