My Willys 3A and 3B Community

3A, 3B, DJ Technical Knowledge Base => "Original"-- Technical Questions, Answers, Observations => Topic started by: dluyk on November 12, 2011, 03:53:23 PM

Title: oil change
Post by: dluyk on November 12, 2011, 03:53:23 PM
When changing the oil, how do you remove/drain the oil from the
filter cannister?  Hope this question isn't to simple.
Title: Re: oil change
Post by: philshevlin on November 12, 2011, 04:41:06 PM
I used a Mityvac.  But a turkey baster would work.  Just wash it before you put it back in the kitchen drawer.
Title: Re: oil change
Post by: Carls_jeep on November 12, 2011, 07:26:04 PM
You can buy a rubber bulb thing that is like a baster but it's all plastic and rubber. Rinse it out and drain it after use to make it last longer. Horrible Freight has a small hand pump that works real good.
Title: Re: oil change
Post by: calvinhunt on November 13, 2011, 12:48:53 AM
I purchased a hand suction pump from NAPA for about $10. �It's about the size of a grease gun.  Works great.