My Willys 3A and 3B Community

3A, 3B, DJ Technical Knowledge Base => "Original"-- Technical Questions, Answers, Observations => Topic started by: Tumbleweed on November 04, 2011, 02:41:32 PM

Title: Firewall Holes
Post by: Tumbleweed on November 04, 2011, 02:41:32 PM

I am in the process of welding all the unecessary holes in the firewall. Some are obvious that need plugging but is there a picture or print that shows the proper number of holes for cables, etc.? I hate to weld up a hole only to find out I needed to have one for an instument line.

Thanks,

George

Title: Re: Firewall Holes
Post by: athawk11 on November 04, 2011, 10:30:39 PM

Hey George,

I found this at the 2A page. �I am just at the stage of pushing things through my firewall. �I think the only real difference for a 3A is the heater knock out holes positions.

http://www.cj-2a.com/oldsite/techtips/dash_holes/


Tim

Title: Re: Firewall Holes
Post by: Tumbleweed on November 07, 2011, 11:23:14 AM

Thanks Tim,

And just in time - I'm back in the garage tonight with the welder. Greatly appreciated.

George