My Willys 3A and 3B Community
3A, 3B, DJ Technical Knowledge Base => "Original"-- Technical Questions, Answers, Observations => Topic started by: athawk11 on September 23, 2011, 08:51:30 PM
-
I didn't want to highjack Robertos tub work videos, so I started a different thread. �My chassis is done. �I started the engine. It started as if I never even took it apart. (Thank God).
Just some photos of what I have been working on. �
(http://i1195.photobucket.com/albums/aa397/athawk11/Tubunderside2.jpg)
(http://i1195.photobucket.com/albums/aa397/athawk11/tubundersidesheetmetal20101231.jpg)
(http://i1195.photobucket.com/albums/aa397/athawk11/tubunderside20110916.jpg)
(http://i1195.photobucket.com/albums/aa397/athawk11/tubundersidegreen20110920.jpg)
(http://i1195.photobucket.com/albums/aa397/athawk11/tubtopprimerfiller20110923.jpg)
Tub is almost done. �I have one more 320 sanding, then Gillespies Red Oxide, some 400 wet sanding, some Gillespies 23070, and I can start to reassemble this thing. �I still need to finish the fenders, windshield, grille and tailgate.
-
Looking good! Keep up the progress! ;)
-
very nice.....wanna trade??? ;D
-
Athaw11, no problem at all!!!! Cool shots! I have still a lot of work to do! Boufffff! :-/
Just curious: where have you got the new panels? Many thanks! And keep us informed.
-
That's some fantastic work there, are you planning to undercoat it too? have been figuring out if i want to undercoat then paint to protect it or try some of that rubberize coating then paint.
Seems like the best work comes out of a garage........... � ;) ;) ;)
Andy
-
Thanks for the kind words from all. �
Randy, though I know you're kidding, I'm sorry, I can't trade. �It's by no means perfect, but as much time as this tub took to get back to a decent condition, my wife would kill me. She's already * at me for the time spent in the garage. �If I would have know the total hours spent on the tub alone, I would have considered it a steel to pay $3000-$4000 for a new tub.
Roberto, I got the front floor pans ($65.00 each) and the tool box sides from Classic Enterprises and the hat channels from Midwest Millitary. �The links are below. ��I really wanted to do the rear pan too, but I just couldn't pull that trigger. �Too Much $$$. I opted to add additional hat supports to the rear pan to stiffen it up a bit. �
The web sites are: �http://www.classicent.com/jeep.php#4164 � �http://www.midwestmilitary.net/m38p12.html
�
The pans fit pretty well after some cutting and shaping the edges at the Transmission tunnel area. �The few extra inches came in handy as the rotten steel climbed up the tunnel edges.
Andy, I too thought about an undercoat. �But from what I read on the jeep sites, if you ever want to get it off for repairs, it's nearly impossible. �And there is a potential for hidden rust to develop, so I opted to coat the whole tub (and chassis) with Master Coat Silver. �A POR 15 kind of product with regard to its rust proof qualities, but unlike POR, the Master Coat can be sanded and painted using any top coat. �In the end, I really wanted the underside to match the top side. �
I am close now. �Have been wet sanding. If my wife let's me, I may be able to get the top coat on the tub this weekend. �Fingers crossed.� �
-
I totally understand, and yes I was kidding....very nice work sir....the wife thing I also understand..mine suggested a cigar box to keep track of my purchases for Beuhla...that lasted about the first or second order from Walcks...then I moved too a boot box....now I kinda got my eye on one of those Christmas tubs at Wallyworld.......maybe even two of them.....again beautiful work.
-
Fantastic work!
-
Nice work!
Good choice on the classic enterprises and midwest military stuff, I think most people wouldn't bother importing anything if they knew how good it was.
-
I like the added hat channel under the bed portion. I just spent the other night beating the crap out out my tub taking out the waves and thought they should have added more.
-
I hear you on the tub beating. �I spent hours and hours with a hammer and dolly. �The extra supports were a necessity on this tub. �There were areas that were pretty thin once the rust was removed. �I know it's not stock, but my choice was to replace the floor or stiffen the original floor. �
Thank you again for encouragement.
Tim
-
I wish I'd have read this thread before I ordered hat channels. I got mine from Classic for $185 shipped to TX. Looks like the Midwest kit is a little cheaper plus it includes the transmission tunnel hat channel. I'm still happy with the Classic Kit, its very good quality and the welds and craftsmanship look top notch. But I guess I should have gone with the Midwest kit. How does the welds and accuracy/alignment to the bottom of the tub look? My Classic hat channels line right up, but I wish they had the tunnel portion.
Midwest:
(http://www.midwestmilitary.net/m38channelkit.jpg)
Classic Ent:
(http://www.classicent.com/images/p7240005.jpg) (http://www.classicent.com/images/p7240005a.jpg)
-
Hey Comanche_County,
I actually had to weld the Midwest hat channels together. Thus the lower price I guess. They are pretty nice overall. They had the anti crush sleeves and threaded insert, thus I didn't have to put the wood back in. Measuring before welding was tedious, but I did want the transmission tunnel channel.
Tim
-
Hey there CC - did the channels from Classic fit well? I believe they had the crush sleeves in them as well? Were they also threaded?
-
What and where do you mean by a threaded insert?
-
Hey Bretto,
The hat channel that crosses directly below the gas tank has a threaded insert. The bolt is screwed up through the out rigger body mount and into the hat channel. This is the only mounting location that is done this way.
I am no pro, but probably a couple reasons for it. 1. A through bolt with a hex head under the gas tank is probably not desireable. It could rub and eventually cause a leak. 2. If you want or need to remove or lift the tub, you don't need to pull the gas tank to do it.
Tim